Opens in a new tab

THEO Knowledge Base

THEO MA1 Series Tutorial (US) | Gas Plumbing Guide

Like electricity, plumbing the MA1 to your gas source is up to you. Our applications team has tested a lot of hardware, and the parts below are what works most consistently in US shops. The MA1 has a 6 mm push-in gas inlet. It ships with a 10 mm gas hose and one 10 mm…

Get Ready for Delivery — THEO MA1 Series

Everything to have in place before your THEO MA1 Series arrives: laser safety area, dedicated power circuit and plug (EU/US), shielding gas and regulator, door interlock, fume extraction.

THEO MA1 Series Tutorial (EU) | Unboxing and Setup

THEO MA1 Series Tutorial (US) | Accessories

THEO MA1 Series Tutorial (US) | Unboxing and Setup

THEO MA1 Series Tutorials | Gas Regulators

THEO MA1 Series Tutorial (US) | Power Connection

THEO Dual Wire Feeder Extension Kit | Setting Up the Dual Wire Feeder Kit — Video Tutorial

This video walks through the setup of the THEO Dual Wire Feeder Expansion Kit step by step. For full reference, see the Dual Wire Feeder Kit Manual.

THEO MA1 Series Tutorials | Handheld torch protective cover slide replacements

Issue Date: Nov. 4th, 2025Memo Number: TB.MP.11425ARevision: 1Products Affected: All Handheld Laser Systems Tools: Instructions The following Instructions are intended to guide in the replacement of the protective cover slide (window) in all Theo handheld laser systems. These instructions will reduce contamination of the focusing lens and all other torch optical components. Note: Establish a proper workspace…

THEO MA1 Series | Operating Parameters

Below is a consolidated reference table covering all current MA1 Series handheld laser welder models (MA1‑35, MA1‑45, MA1‑65, and MA1 ULTRA). These details will aid a Laser Safety Officer (LSO) or safety consultant in designing a safe Class 4 laser work environment: selecting appropriate eyewear, defining barriers/enclosures, managing ventilation, and implementing access control procedures. All…