Opens in a new tab
man-two-helmets-smiling-full

Laser safety

Laser welding
helmets

Helmets built for handheld laser welding: a laser filter for the near-infrared range and a shell that covers your face. How the protection is rated, and what sets the helmets apart.

VIZ-R2 and VIZ-R2 PLUS

How the protection is rated.

The laser filter of both helmets is marked D LB7 IR LB8 for 900 to 1080 nm, the carbon protection shield D LB7 IR LB8 for 900 to 1100 nm. These are ratings from EN 207:2017. D stands for continuous wave lasers, I and R for pulsed modes. The LB number says how much power density the filter withstands.

So the helmet does not only filter the laser light: it also withstands a direct hit for more than 5 seconds in continuous wave mode, or for 50 pulses, without breaking or melting.

The manual names the standards: EN ISO 16321-1:2022, EN ISO 16321-2:2021, AS/NZS 1337.1:2010 and AS/NZS 1338.1:2012. The filters carry the CE mark according to EN 207:2017, under PPE Regulation (EU) 2016/425.

THEO VIZ-R2 & VIZ-R2 PLUS manual
Welder with the THEO VIZ-R2 laser welding helmet

Three helmets. What sets them apart.

VIZ-R2

A passive filter at shade W2.5 and the larger view, 106 x 120 mm. With an interlock that knows whether you are wearing it. Not available in North America.

VIZ-R2 in the shop

VIZ-R2 PLUS

An adjustable darkening filter from W2.5 to W5, a 100 x 60 mm view and a low-battery light. Same shell, same interlock.

VIZ-R2 PLUS in the shop

VIZ-R1

A nylon shell, a shade 3 filter and a large acrylic viewing window. No interlock. Only available in North America.

VIZ-R1 in the shop

Three helmets, side by side.

VIZ-R1 VIZ-R2 VIZ-R2 PLUS
Filter Shade 3, 3 mm polycarbonate Passive, shade W2.5 Adjustable darkening, W2.5 to W5
Optical density OD7+ at 900 to 1100 nm OD6+ at 900 to 1000 nm, OD7+ at 1000 to 1080 nm OD6+ at 900 to 1000 nm, OD7+ at 1000 to 1080 nm
Standards and rating ANSI Z87+, CE EN 175 B D LB7 IR LB8 (EN 207:2017) D LB7 IR LB8 (EN 207:2017)
View size 4 x 4.75 in (102 x 121 mm) 106 x 120 mm 100 x 60 mm
Visible light transmission 7% 20% 25% at W2.5, down to 2% at W5
Interlock Not included Included Included
Shell Nylon Flame-retardant nylon, carbon fiber front plate Flame-retardant nylon, carbon fiber front plate
Weight ~650 g ~800 g ~850 g
Warranty 1 year 1 year 1 year
Availability North America only Not in North America All regions
VIZ-R1 VIZ-R2 VIZ-R2 PLUS
Filter Shade 3, 3 mm polycarbonate Passive, shade W2.5 Adjustable darkening, W2.5 to W5
Optical density OD7+ at 900 to 1100 nm OD6+ at 900 to 1000 nm, OD7+ at 1000 to 1080 nm OD6+ at 900 to 1000 nm, OD7+ at 1000 to 1080 nm
Standards and rating ANSI Z87+, CE EN 175 B D LB7 IR LB8 (EN 207:2017) D LB7 IR LB8 (EN 207:2017)
View size 4 x 4.75 in (102 x 121 mm) 106 x 120 mm 100 x 60 mm
Visible light transmission 7% 20% 25% at W2.5, down to 2% at W5
Interlock Not included Included Included
Shell Nylon Flame-retardant nylon, carbon fiber front plate Flame-retardant nylon, carbon fiber front plate
Weight ~650 g ~800 g ~850 g
Warranty 1 year 1 year 1 year
Availability North America only Not in North America All regions

Swipe sideways to compare →

Marked rows: where the helmets differ.

Availability: the VIZ-R1 is only available in North America. The VIZ-R2 (not the VIZ-R2 PLUS) is not available in North America. The VIZ-R2 PLUS is available in all regions.

Know the limits.

A laser welding helmet protects against accidental, short exposure to scattered and diffuse laser light. It is not built for deliberate, continuous or repeated direct exposure to the beam. The ratings are tested for a maximum exposure of 5 seconds.

So the helmet is one layer. Wear impact-resistant safety glasses and ear protection with it. Don’t weld overhead in it. Replace a scratched, cracked or pitted lens or filter right away.

And match the filter to your laser. That is your job, or your laser safety officer’s.

Laser welding safety: the full picture

Frequently asked questions

Laser welding helmets

Can I use a normal arc welding helmet for laser welding?

No. You need protection rated for the wavelength of your laser. THEO’s MA1 manual asks for EN 207:2017 certified laser safety goggles or a laser welding helmet that covers the whole wavelength range of the machine.

What is the difference between VIZ-R2 and VIZ-R2 PLUS?

The filter. The VIZ-R2 has a passive filter at shade W2.5 and the larger view, 106 x 120 mm. The VIZ-R2 PLUS has an adjustable darkening filter from W2.5 to W5, a 100 x 60 mm view and a low-battery light. Shell, interlock and warranty are the same.

Do people standing nearby need protection too?

Yes. Everyone in the immediate vicinity of the machine wears the same protective equipment as the welder. Laser safety glasses

Where is the manual?

THEO VIZ-R2 & VIZ-R2 PLUS manual

What protection level must a laser welding helmet have?

It must be certified for the wavelength and power of your laser. In Europe the standard is EN 207. The laser filters of the VIZ-R2 and the VIZ-R2 PLUS are marked D LB7 IR LB8 (EN 207:2017).

Can I use the helmet for TIG and MIG welding too?

The VIZ-R2 and the VIZ-R2 PLUS are built and certified for laser welding. For arc welding, use a helmet that is certified for arc welding.

THEO shop

Helmet on, ready to weld.

All three helmets, with prices, are in the shop.

Welder wearing the THEO VIZ-R2 laser welding helmet

Laser welding safety

Safety. Matters.

Why the helmet is only one layer.

THEO laser welding helmet

Need helmets for a whole team?

Tell us how many welders and which machines. We'll put the offer together.

Your request

It takes about a minute. Fields with * are required.

We reply within one business day.