The numbers
- Optical density, 847–1080 nm
- OD8+
- Optical density, 1080–1100 nm
- OD6+
- Visible light transmission
- 47%
- Lens
- Polycarbonate, amber
- Filter
- F42.P1P18.5792
- Standards
- ANSI Z87.1, EN 207
Check the marking on the glasses against the wavelength of your laser. The MA1 Series works at 1080 ± 10 nm; its manual recommends OD6+.
Buy in the shopIf you can see the weld, wear them.
A handheld laser welder is a Class 4 laser. The beam is invisible, and so is its reflection.
THEO’s MA1 manual is plain about it: laser eye protection is obligatory when you operate or handle the machine, and people in the immediate vicinity wear the same protective equipment as the welder.
That means the colleague holding the part, the supervisor watching, the visitor on a shop tour. One pair each.
Glasses and helmet. Wear both.
THEO recommends both: laser safety glasses and a laser welding helmet.
The helmet covers your face as well as your eyes. The glasses stay on when the helmet comes off: setting up, checking the weld, standing by.
The VIZ-R2 manual asks for eyewear under the helmet too: wear impact-resistant safety spectacles or goggles under the helmet at all times.
Frequently asked questions
Laser safety glasses
Glasses or helmet?
Both. THEO recommends laser safety glasses and a laser welding helmet: the helmet covers your face as well as your eyes, and the glasses protect your eyes whenever the helmet is off. Laser welding helmets
What does OD mean on laser safety glasses?
OD stands for optical density. It says how much laser light the filter blocks at a given wavelength. Each step is a factor of ten: OD 6 lets through one millionth of the light, OD 7 one ten-millionth. The value only applies to the wavelength range printed next to it.
Which lasers do the IPRO-AMBER glasses cover?
847 to 1100 nm: OD8+ from 847 to 1080 nm and OD6+ from 1080 to 1100 nm.
Can I see normally with them?
They let 47% of visible light through.
What does the THEO MA1 manual ask for?
EN 207:2017 certified laser safety goggles or a laser welding helmet that covers the whole wavelength range of the machine, and it recommends OD6+ from 1070 to 1087 nm. Check the marking on your glasses against it and ask your laser safety officer.
Helmets
Glasses on. Helmet on.
THEO recommends both. VIZ-R1, VIZ-R2 and VIZ-R2 PLUS.

Laser welding safety
Safety. Matters.
Glasses are one layer. See the rest.

One pair for everyone in the room.
Tell us how many you need. We'll put the offer together.