Opens in a new tab

Advantages of laser welding

The advantage of laser welding
is in your hands

With laser welding, you can achieve up to 10× faster welding speeds, significantly boosting productivity and profitability.

Laser or traditional welding?

This shouldn’t be a question

Traditional welding asks a lot of the welder: several passes, a lot of heat in the part, and rework once the seam is done. Laser welding takes most of that away.

A THEO laser welder is up to 10× faster than TIG. The heat input is low, so parts distort less and keep their strength. The melt pool is uniform, so seams come out consistent from one part to the next.

You also use less: less filler, fewer consumables, less electricity. The table below shows the differences row by row.

Traditional and THEO laser welding compared

No comparison, really.

Traditional welding THEO laser welding
Speed Slower processing times, often requiring multiple passes. Up to 10× faster than TIG.
Precision Moderate precision, with higher reliance on operator skill. Superb accuracy, ideal for small parts and thin gauge applications.
Waste reduction High material waste due to excess filler and slag. Minimal waste, fewer consumables, and environmentally responsible.
Heat impact Higher heat input, increasing the risk of warping or fatigue. Low heat input: minimal distortion and preserved material strength.
Cost efficiency Consumables and labor hours increase operating costs. Significant long-term savings and reduced operating costs.
Welding seam damage Potential for porosity, lack of consistency. Uniform melt pool and great consistency.
Environmental impact High emissions, energy-intensive, and more consumable waste. Lower electricity consumption, lower overall costs.
THEO laser welding Traditional welding
Speed Up to 10× faster than TIG. Slower processing times, often requiring multiple passes.
Precision Superb accuracy, ideal for small parts and thin gauge applications. Moderate precision, with higher reliance on operator skill.
Waste reduction Minimal waste, fewer consumables, and environmentally responsible. High material waste due to excess filler and slag.
Heat impact Low heat input: minimal distortion and preserved material strength. Higher heat input, increasing the risk of warping or fatigue.
Cost efficiency Significant long-term savings and reduced operating costs. Consumables and labor hours increase operating costs.
Welding seam damage Uniform melt pool and great consistency. Potential for porosity, lack of consistency.
Environmental impact Lower electricity consumption, lower overall costs. High emissions, energy-intensive, and more consumable waste.

Swipe sideways to compare →

Why it works

Why the heat stays where you want it

A laser puts a lot of energy into a very small spot. The metal at that spot melts quickly and the weld is narrow, so only a small volume of metal is heated. Much less heat spreads into the part around the seam.

Less heat in the surrounding metal means a narrower heat-affected zone, the strip next to the weld where the metal’s structure changes. That is why the part is less likely to warp.

This is a property of the process, not of one machine. Your result still depends on settings and technique.

Distortion

Less distortion means less rework

When a part moves during welding, you spend time afterwards on straightening, fitting and finishing. A process that puts less heat into the part gives you less of that to do. You see it most on thin sheet.

The same goes for the seam. A weld made with the MA1 needs almost no grinding or polishing.

What is left depends on the job: seam appearance, oxide color and what your customer accepts.

Materials and thickness

Know the penetration of your machine

Laser welding is known for thin sheet, where low heat input keeps the metal flat. How deep you can weld depends on laser power.

With the MA1 Series, weld penetration in stainless steel runs from 3.5 mm on the MA1-35 to 8.5 mm on the MA1 ULTRA. Those figures are weld penetration, not the thickness of the sheet you can join.

Training

Skill still matters, in a different way

A laser does not remove the need to learn the process. TWI, the UK welding research institute, notes that the welder’s skill and the laser’s characteristics together shape the weld profile and the defects you get.

What changes is how long it takes. Operators train on the MA1 in hours and reach proficiency in 1 to 2 weeks.

Plan for training anyway. A short learning curve is a benefit, not a reason to skip it, and some countries, Germany among them, require a designated laser safety officer.

Fit-up

Fit-up decides how good the weld is

A laser beam is small, so it is less forgiving of gaps between parts than an arc. If the edges are cut and held well, you get the benefits above. If the gap varies along the seam, quality drops.

There are ways to widen the margin. The MA1 torch has a wobble function that moves the beam for a wider weld: up to 4 mm (0.16 in), and 6 mm with the Dual Wire Feeder. A wire feeder adds filler to bridge gaps.

As a rule of thumb, with filler wire you can bridge a gap of up to about 80% of the wobble width. That is roughly 3 mm with the T1 Wire Feeder. For the Dual Wire Feeder we state 4 mm, on the safe side of the rule. It is a rule of thumb, not a tested limit, so try it on your own joint first.

So the saving starts before welding: consistent cutting, bending and clamping. Shops that already hold tight fit-up get the most from laser welding.

The honest part

Where laser welding is not the best choice

Laser welding is not the answer to every job. Consider another process when:

  • The joint has poor fit-up. Large or uneven gaps and parts that move during welding favor an arc process.
  • The metal is thicker than your machine welds. Each MA1 model has a weld penetration limit, up to 8.5 mm in stainless steel on the MA1 ULTRA.
  • The metal is highly reflective. Aluminum reflects much of the beam and conducts heat away fast. The MA1 Series welds it, but expect more testing and settings work than with stainless steel.
  • You cannot give it the safety setup. The MA1 is a Class 4 laser product. It needs laser eye protection for everyone in the area and a controlled room or laser curtains.

The Weld Off

TIG vs THEO

Who is faster: TIG welding or the THEO handheld laser welder?

Watch the film
TIG vs Laser Weld Off

THEO MA1

The Time Saver

The Time Saver: the THEO MA1 handheld laser welding machine

Talk to THEO

Select the perfect handheld laser welding machine for your needs.

Your request

It takes about a minute. Fields with * are required.

We reply within one business day.