
T1 Wire Feeder
Maximizing your laser welding efficiency
Don’t adjust your process to the tools. Make the tools work the way you need them to. The T1 Wire Feeder deposits wire into the weld pool automatically and continuously, in the exact quantity and at the speed you need.

T1 Wire Feeder
Seamless integration. Flawless performance.
The T1 Wire Feeder is engineered exclusively for the MA1 Series. It was created to fill the gaps left by other wire feeders: an instant, synchronized wire supply for continuous welding.
- Included
- With every MA1
- Wires
- One
- Wire diameters
- 0.8 / 1.0 / 1.2 / 1.6 mm
- Wire materials
- Stainless steel, aluminum, carbon steel
- Maximum wire coil weight
- 25 kg (55 lb)
- Power supply
- 24 V DC
- Dimensions (L × H × W)
- 580 × 360 × 245 mm
- Weight
- 13 ± 3 kg (29 lb)
T1 Wire Feeder
Perfect sync and versatility
The T1 Wire Feeder and the MA1 welding machine work as one system.
Immediate and steady wire supply
The wire is there the moment you start and keeps coming at a steady rate.
No delays, no hiccups
Wire feed and laser are synchronized, so the weld does not wait for the wire.
Plug-and-weld simplicity
Connect the T1 to your MA1 and weld.
Developed in-house
Built by THEO to address the shortcomings of existing wire feeders on the market.
Single or dual
Which wire feeder fits the job?
| Dual Wire Feeder | T1 Wire Feeder | |
|---|---|---|
| Wires | One or two | One |
| Wire diameters | 1.2 / 1.6 mm | 0.8 / 1.0 / 1.2 / 1.6 mm |
| Wire materials | Stainless steel, carbon steel, aluminum | Stainless steel, aluminum, carbon steel |
| Built for | Wider and deeper welds, typical MIG/MAG jobs | Typical TIG jobs |
| Works with | MA1 Series | MA1 Series |
| T1 Wire Feeder | Dual Wire Feeder | |
|---|---|---|
| Wires | One | One or two |
| Wire diameters | 0.8 / 1.0 / 1.2 / 1.6 mm | 1.2 / 1.6 mm |
| Wire materials | Stainless steel, aluminum, carbon steel | Stainless steel, carbon steel, aluminum |
| Built for | Typical TIG jobs | Wider and deeper welds, typical MIG/MAG jobs |
| Works with | MA1 Series | MA1 Series |
Swipe sideways to compare →
Dual Wire Feeder
When the specs call for wider and deeper welds
The T1 Wire Feeder can replace typical TIG jobs, but it is not built for typical MIG/MAG jobs. That is the job of the TD1, THEO’s Dual Wire Feeder: two wires, 1.2 mm or 1.6 mm, for the wider and deeper welds that are done with MIG/MAG today.
T1 Wire Feeder FAQ
What kind of wire can be used with the wire feeder?
Standard filler wire from 0.8 to 1.6 mm for the respective material (stainless steel, aluminum, carbon steel).
Do I have to buy the T1 Wire Feeder separately?
No. The T1 Wire Feeder is included in every MA1 purchase.
When do I need the Dual Wire Feeder instead?
The T1 Wire Feeder can replace typical TIG jobs. When the specs call for wider and deeper welds, the kind of work that is done with MIG/MAG today, look at the Dual Wire Feeder.
Does the T1 Wire Feeder work with other laser welders?
No. It is built for the THEO MA1 Series and is for use with an MA1 only.
Laser welding
The advantage of laser welding. In your hands.
Laser welding outperforms traditional methods like TIG and MIG welding in several key areas. Weld up to 10x faster and get more done.
Talk to an expert
For more information on buying a wire feeder, contact us.