Åbner i en ny fane
THEO TM300 laserrenser

Handheld laser welding up to 8.5 mm

TM-300 handheld laser cleanerMake yesterday
look new again

The THEO TM-300 is a handheld laser cleaning machine that blasts away rust, paint, and contaminants in seconds. Portable, air-cooled, and built for precision.

No abrasives. No solvents. No post clean-up.
Up to 1 m²/min cleaning speed

BY MAXPHOTONICS

CEFDAFCC1 year warranty, 2 years once registered. THEO Service Centers in Westborough US and Munich Germany.

Instead of grinding, blasting and chemicals

Rust. Paint. Contaminants. One tool.

Sandblasting and chemical cleaning demand hazmat-level PPE, create hazardous waste, and put your crew at risk. Laser cleaning gives you precise surface preparation without grinding, blasting, chemicals, or unnecessary damage.

  • No chemicals
  • No blast media
  • Non-abrasive
  • No toxic dust clouds. No chemical runoff.
  • No complex clean-up
  • Low heat input: less damage to the base material
How laser cleaning works
Laser cleaning head removing rust from a steel pipe

TM-300

The laser cleaner that turns back time

When every second counts, the TM-300 puts hours back on your clock. You control every pass with precision. Less downtime. More jobs done in no time.

300 WMOPA fiber laser, pulsed
7,500 mm/sscan speed, up to
1 m²/mincleaning speed, up to
150 × 150 mmcleaning field, up to

Time Machine

TM-300 product film

THEO TM-300 laser cleaner: the film

Applications

What the TM-300 removes

The TM-300 is a laser cleaning machine for laser rust removal, paint and oxide removal, and weld cleaning:

  • Rust, paint and oxide removal
  • Pre- and post-weld cleaning
  • Surface prep before coating
  • Restoration and refinishing

It works on stainless steel, aluminum, structural steel, copper, stone, and even select woods and plastics.

Built-in safeguards

Maximum safety without the risk

The TM-300 vaporizes contaminants on contact while the extractor draws airborne particles. All you need is a fume extractor and proper PPE. (We recommend wearing a powered air-purifying respirator (PAPR) whenever you clean.)

  • Smart shutdown. Laser fires only when aimed at the workpiece.
  • Dual-channel interlocks. Stops operation unless all safety conditions are met.
  • Fiber breakage detection. Constant monitoring with instant alerts and pinpoint diagnostics.
Gloved operator holding the TM-300 cleaning head, handle display lit

Easy to use

Set up. Lock in. Go.

Lightweight, mobile and user-friendly. The 10.4″ touchscreen comes loaded with intuitive presets and the built-in distance meter locks your focal point instantly. Adjust settings from the handle without walking back to the machine. The ≤ 2 kg (≈ 4.4 lb) cleaning head keeps operators productive all day without fatigue.

TM-300 cleaning head with handle display and control buttons

Laser cleaning questions

Will laser cleaning damage the base material?

When the process is set up correctly, the base material stays untouched. The TM-300 uses MOPA pulsed laser technology: short pulses hit the contamination hard, then give the material time to cool before the next pulse lands. That limits heat spread into the base material, and damage to it stays minimal.

What does the TM-300 remove, and from which materials?

Rust, paint, oxides, grease, and other contaminants. It works on stainless steel, aluminum, structural steel, copper, stone, and even select woods and plastics.

What do I need to run it?

A fume extractor and proper PPE. We recommend wearing a powered air-purifying respirator (PAPR) whenever you clean. The TM-300 is air-cooled and runs on 100–240 V, 50 / 60 Hz. Laser Safety Officer training is available through our training partners.

Does laser cleaning leave residue or fumes?

Laser cleaning is a dry process: no blasting media and no chemicals. The layer it removes turns into fumes and fine particles, and these have to be extracted at the cleaning head. More on air control

Which version do I need, Gaussian or Flat-top?

Both handle rust, paint and oxide removal, pre- and post-weld cleaning, surface prep before coating, and restoration and refinishing. The Gaussian is best for deeper contamination such as oxide and rust removal. The Flat-top is best for untouched base materials such as molding stations, car body and industrial kitchen. If you are not sure, one of our experts will help advise you.

What comes with the machine?

Everything you need to start cleaning right away, including 3 different field lenses (160, 254 and 330 mm) and 1 protective window.

What warranty and certification does the TM-300 have?

1 year warranty, 2 years once registered. Certification: CE, FDA, FCC.

How fast is laser cleaning compared with sandblasting?

That depends on the layer: light rust and oxide come off quickly, thick paint takes several passes. Laser cleaning saves the work around the job: no masking, no blasting media and no clean-up of spent media.

How much does a laser cleaner cost?

The price depends on the version and the accessories, so please ask us for a quote.

Compare more than the price. Check that the machine’s safety and quality are certified, and that a partner near you can train your team and service the machine. Both matter as much as the number on the quote.

Service and support

Be part of our global network

Our worldwide network of trusted Partners means you get the tools you need when you need them. With THEO Service Centers in Westborough US and Munich Germany, you have training, troubleshooting, parts, repairs, and after-sales service at your fingertips. Full support wherever you are. Need help fast? Our online support connects you directly to our workshop.

Behind THEO is Maxphotonics, a global leader in laser solutions since 2004. With over 200,000 units produced annually, Maxphotonics brings decades of engineering excellence to every THEO product.

See the TM-300 at work

Request an online demo with the THEO Applications lab, see it at a THEO Partner near you, or ask for a quote.

Your request

It takes about a minute. Fields with * are required.

We reply within one business day.