Opens in a new tab
Laser safety

Laser enclosures

A Class 4 laser needs walls around it. The barriers and enclosures THEO recommends, and the THEO Bay for partners who demonstrate and train.
See the options

A Class 4 laser needs walls.

A handheld laser welder is a Class 4 laser. Its beam, and its reflections, travel a long way.

THEO’s MA1 manual does not leave it open: the welder may only be operated in a laser welding cell or in an enclosure with interlocked safety devices.

That can be a room of its own, a booth, or a barrier system around the workplace. Which one fits is a question for your risk assessment and your laser safety officer.

Laser welding safety: the full picture

Recommended by THEO

Barriers and enclosures from Laservision.

In general THEO recommends Laservision. Six products from its laser welding safety range, from a folding barrier to a floor-mounted enclosure.

Laservision Portable Laser Barrier System, four folding panels on wheels

Portable Laser Barrier System

Sizes 2 to 6 panels, 99 to 295 in wide (2.5 to 7.5 m)

  • Foldable, for ease of storage
  • Lightweight and wheeled
  • 360° light-tight hinge technology
  • Heavy-duty extruded aluminum frame
  • Certified laser safety barrier panels (M5P06)
  • Ships assembled
Laservision Foldable Laser Welding Booth with viewing window

Foldable Laser Welding Booth

Sizes 8 x 8, 10 x 10, 12 x 12 ft (2.4 x 2.4, 3.0 x 3.0, 3.7 x 3.7 m)

Extras French/double door kit, extra window, extension, interlock

  • Swinging door
  • Viewing window
  • Pre-assembled panels for easy onsite installation
  • Easy to move and shape
  • Foldable, for ease of storage
Laservision Heavy Duty Laser Welding Booth with door and viewing window

Heavy Duty Laser Welding Booth

Sizes 8 x 8, 10 x 10, 12 x 12 ft (2.4 x 2.4, 3.0 x 3.0, 3.7 x 3.7 m)

Extras French/double door, roof kit, interlock

  • Swinging door
  • Viewing window
  • Pre-assembled panels for easy onsite installation
  • Floor anchors
  • Open roof (roof kit available separately)
Laservision Portable Laser Safe Curtain Barrier on a frame

Portable Laser Safe Curtain Barrier

Sizes 5 ft or 8 ft wide, 6.5 ft tall (1.5 or 2.4 m wide, 2.0 m tall)

Protection level 200 W/cm²

  • With or without casters
  • Viewing window optional
LaserArmor 360 portable laser enclosure with roof

LaserArmor 360 Portable Laser Enclosure

Size 8 x 8 ft (2.4 x 2.4 m), with or without roof

Weight 120 lbs (54 kg)

  • Setup time: less than 6 minutes
  • Compact wheeled case for portability
  • Meets ANSI Z136.1
  • Flame-retardant, FM-approved fabric
  • 368 square feet of total protection, 8 x 8 x 10 ft (34 m², 2.4 x 2.4 x 3.0 m)
Laservision Floor Mounted Laser Safe Curtain Enclosure with curved corners

Floor Mounted Laser Safe Curtain Enclosure

Sizes 8 x 8, 10 x 10, 12 x 12 ft (2.4 x 2.4, 3.0 x 3.0, 3.7 x 3.7 m)

Protection level 575, 2,150 or 7,700 W/cm², by curtain (F5P01, F5P02, F5P10)

Extras Viewing window, interlock switch

  • Floor mounted hardware system
  • Curved corners for one continuous curtain
  • Light-tight Velcro seal

Sizes and features are Laservision’s own, from its laser welding safety catalogue; the metric values are converted and rounded. More at lasersafety.com/barriers.

THEO Bay

For THEO partners who demonstrate and train.

The THEO Bay is one of the options: a welding cell for handheld laser welding, made for THEO partners who need to demonstrate and educate. It is available to THEO partners only.

Walls, doors and windows are rated for the laser, in three sizes. It shields the people around it from direct and indirect laser radiation.

THEO Bay: side walls, safety viewing screen, safety doors, roof panel

THEO Bay

Every part is tested against the beam.

Aluminium frame

Extruded profiles, test class T3: holds for 10.5 seconds at 1.51 × 10⁹ W/m².

Composite panels

Aluminium composite walls, test class T3 for 940 to 1090 nm.

Laser safety windows

Green polycarbonate, OD7 from 1030 to 1090 nm, rated D AB6 + IR AB7Y to EN 12254:2010 + AC:2011. 22% visible light transmission.

Safety doors

A single door on the 2×2 and 3×2, a double door on the 4×2.

For lasers up to 2000 W

Wavelengths from 940 to 1090 nm. Keep 500 mm between a 2000 W laser and the side walls.

Indoors, dry

For industrial and commercial areas, +2 to +50 °C. One year warranty.

THEO Bay: three sizes.

Each one as Basic or Full View. The renders show Full View.

THEO Bay 2×2, Full View

THEO Bay 2×2

Length x width 2000 x 2000 mm

Weight 200 kg

Door Single

THEO Bay 3×2, Full View

THEO Bay 3×2

Length x width 3000 x 2000 mm

Weight 260 kg

Door Single

THEO Bay 4×2, Full View

THEO Bay 4×2

Length x width 4000 x 2000 mm

Weight 320 kg

Door Double

One window, or one in every panel.

Basic has one window, in the entrance door. Full View has a window in each panel. Every window measures 935 x 670 mm.

The protection is the same. Basic and Full View share every optical rating and differ only in the number of viewing panels. Choose Full View when others need to see the work: training, supervision, a demo for a customer.

THEO Bay 2×2, Basic: one window in the entrance door

The Bay is the room. You make it a safe cell.

An enclosure is one part of a laser-safe workplace. The operator manual lists what you, the operator, make sure of before the first weld:

  • A risk assessment and an appointed laser safety officer
  • Door safety switches that stop the laser when a door opens (Performance Level e, two-channel)
  • Emergency stops inside and outside
  • A laser status display outside, and the signage
  • Fume extraction. It is mandatory when the Bay is closed
  • Ventilation and lighting when the Bay has a roof
  • Laser safety eyewear to EN 207:2017 for everyone inside
THEO BAY operator manual

Frequently asked questions

Laser enclosures

Which lasers can I use in a THEO Bay?

Handheld laser welders up to 2000 W with wavelengths between 940 and 1090 nm. The MA1 Series works at 1080 ± 10 nm with up to 2000 W.

Do I still need a helmet or glasses inside?

Yes. The manual asks for laser safety eyewear to EN 207:2017 and the rest of your protective equipment inside the enclosure.

Is fume extraction included?

No. Welding equipment and extraction systems are not part of the delivery, and extraction is mandatory when you run the Bay closed.

Can I modify the Bay?

Any modification that could affect safety must be approved by the manufacturer or properly assessed by the operator. That includes installing or changing safety components.

How far is the laser beam dangerous?

Much further than any workshop reaches. For the MA1 Series the calculated eye hazard distance (NOHD) is 127 m for the MA1-35, 156 m for the MA1-45, 174 m for the MA1-65 and 201 m for the MA1 ULTRA. That is why the beam has to be enclosed. The figures are from the MA1 Series operating parameters. Ask your laser safety officer about your setup.

Helmets and glasses

Inside the Bay, you still gear up.

Helmets and glasses for everyone in the cell.

Two THEO laser welding helmets

Laser welding safety

Safety. Matters.

What a laser-safe workplace needs.

THEO laser welding helmet

Tell us about your shop floor.

Which laser, how much room, fixed or mobile. We'll come back with an offer for the right barrier or enclosure.

Your request

It takes about a minute. Fields with * are required.

We reply within one business day.