Opens in a new tab

Handheld laser welding

Frequently asked
questions

Answers on safety, certifications, materials, training and maintenance for the MA1 Series.

Laser welding safety

What should I consider regarding safety?

While the ideal scenario for operating the MA1 Series is in a separate room, necessary safety can also be achieved with the use of laser safety curtains. Appropriate laser safety glasses are needed to protect the operator’s eyes during the welding process. We also recommend the use of gloves, long sleeves, and appropriate work boots for additional protection.

In some countries, including Germany, a designated laser safety officer is required within the company to ensure all safety protocols are being followed. It’s important to note that safety regulations can vary by region. Our solution expert partners are well-versed in local safety requirements and are more than happy to guide you through the safety protocols applicable in your specific region, ensuring your operations are both safe and compliant.

More on laser welding safety

How does the MA1 Handheld Laser Welding System ensure user safety during operation?

The MA1 Series is engineered with a range of safety features to prioritize user safety during operation. It incorporates a double-secured contact sensor that permits operation only when the trigger is in hand contact and the welding torch is in contact with the workpiece. For immediate system shutdown in case of safety concerns, it is equipped with an emergency off button.

The system can also be connected to a door switch interlock circuit that can be linked to the welding room doors, ensuring the device safely shuts down if someone enters during operation. To prevent unauthorized or accidental operation, the MA1 Series is fitted with a safety key lock, further enhancing its operational safety.

What certifications does the MA1 Series hold?

The MA1 Series holds several certifications including EN 60204-1, EN 60825-1, ISO 11553-2, ISO 12100, EN IEC 61000-6-2, and EN IEC 61000-6-4.

Welding with the MA1 Series

What materials can the MA1 Handheld Laser Welding System weld?

The MA1 Series can weld a variety of materials including carbon steel, stainless steel, aluminum, non-ferrous metals, and other alloys. For detailed information on materials and weld penetration, please request the MA1 brochure.

Can a thin sheet be welded to a thick sheet?

Yes, it is possible! This is particularly feasible for cladding sheets or carriers.

What kind of wire can be used with the wire feeder?

Standard filler materials from 0.8 to 1.6 mm for the respective materials (stainless steel, aluminum, construction steel) can be used.

Can the MA1 Handheld Laser Welding System be used for mobile welding projects?

Yes, the MA1 Series is designed to be lightweight and portable, making it suitable for mobile welding projects. The MA1-35 requires a 220 V AC power supply with 16 A, and the MA1-45, MA1-65 and MA1 ULTRA models require 220 V AC with 32 A.

However, it’s important to note that necessary safety precautions must be met to ensure safe operations on construction sites and building locations. This includes proper setup, use of safety gear, and adherence to safety regulations specific to the location.

What training is required to operate the MA1 Handheld Laser Welding System?

The MA1 Series is designed to be simple to learn and operate. Operators train in hours and reach proficiency in 1 to 2 weeks. Additionally, our solution partners provide hands-on training in system operation, welding, and safety to ensure users are fully equipped to use the MA1 Series effectively and safely.

What maintenance is required for the MA1 Handheld Laser Welding System?

The MA1 Series requires low maintenance, thanks to its air-cooled design which eliminates the need for frequent upkeep and reduces downtime.

How does the MA1 Handheld Laser Welding System contribute to reducing production costs?

The MA1 Series helps reduce production costs by improving welding speed and efficiency, reducing training time, and requiring less maintenance.

What are the downsides of laser welding?

Laser welding needs a tighter joint fit-up than MIG welding: it is less forgiving of gaps between the parts. A handheld laser welder is also a Class 4 laser product, so the workplace needs a laser safety setup before the first weld.

More on laser welding safety

Can you laser weld vertically or overhead?

Yes. The MA1 Series welds in all positions: flat, horizontal, vertical and overhead. The welding position does not change the laser safety setup: the same rules apply in every position.

More on laser welding safety

What is wobble welding?

The laser beam swings from side to side across the joint while you move along it. A wider wobble gives a wider seam and bridges small gaps between the parts. On the MA1 Series you set the wobble width from 0 to 4 mm.

Is laser welding as strong as TIG or MIG welding?

A laser weld can meet the same strength requirements when penetration, joint fit-up and filler wire are right. As with any welding process, the strength depends on the setup. For load-bearing parts, qualify the welding procedure the same way you would for TIG or MIG.

Is a laser welder worth it for a small shop?

It pays off where you weld a lot of thin sheet, stainless steel or aluminum, where seams are long, or where you spend time straightening and grinding after welding. It pays off less for occasional heavy structural work. Your THEO Partner can go through your parts with you.

Is laser welding faster than TIG?

Yes. THEO laser welding is up to 10x faster than TIG, depending on material, thickness and seam.

Laser welding and TIG compared

Can you weld different metals together?

Yes, for some pairs. Stainless steel to carbon steel is the common case and works well with a suitable stainless steel filler wire. Laser welding helps here: its low heat input keeps the zone where the two metals mix narrow.

Other pairs depend on the alloys, the joint and the filler. Stainless steel to galvanized steel needs care, because the zinc coating turns to vapor and can leave pores. Copper to stainless steel can crack if too much copper mixes into the weld. Some pairs, such as aluminum to steel, aluminum to copper and titanium to steel, form brittle layers that welding does not avoid. Test your own parts with your THEO Partner before production.

Can’t find what you are looking for?

Your request

It takes about a minute. Fields with * are required.

We reply within one business day.