Before you scroll
What a mark means, and what it doesn’t
A CE mark is the manufacturer’s declaration that a product meets EU rules. Ours is backed by test reports from SGS, an independent test lab.
For the US, laser products are reported to the FDA and get an accession number. That is a registration of the product report. It is not an approval, and nobody should tell you otherwise.
Below you find the standards per product. If a product is not listed with a standard, we have not published a document for it yet. Ask us and you get a straight answer.
Laser welding
MA1 Series
MA1-35, MA1-45 and MA1-65. Verified by SGS.
- Laser class
- Class 4, EN 60825-1:2014+A11:2021
- EU machinery and laser safety
- EN 60204-1:2018, EN 60825-1 (Machinery Directive 2006/42/EC)
- EU electromagnetic compatibility
- EN IEC 61000-6-2:2019, EN IEC 61000-6-4:2019 (EMC Directive 2014/30/EU)
- US electromagnetic compatibility
- FCC, 47 CFR Part 15B
- US laser product report
- Filed with the FDA (21 CFR), accession number on request
- Verified by
- SGS
Standards as verified for MA1-35, MA1-45 and MA1-65.
See the MA1 Series
Laser cleaning
TM Series
TM-300G and TM-300F.
- Laser class
- Class 4, EN 60825-1
- EU directives
- Machinery 2006/42/EC, EMC, Low Voltage, RoHS 2011/65/EU
- Machine and laser safety
- ISO 11553-1:2020, EN ISO 11553-2, ISO 12100, EN 60204-1:2018+A1:2025
- US laser rules
- Complies with 21 CFR 1040.10 and 1040.11, except for deviations under Laser Notice No. 56. FDA accession number 2620746-000
- US electromagnetic compatibility
- FCC Part 15
As stated in the TM Series operator manual, version 0.9.
See the TM SeriesThe rest of the kit
Feeders, helmets, eyewear, enclosure
T1 Wire Feeder
EU electromagnetic compatibility to EN IEC 61000-6-2 and 61000-6-4, FCC Part 15. Verified by SGS.
TD1 Dual Wire Feeder
CE (Machinery, EMC), RoHS, FCC Part 15 Class A. Each unit shipped to the EU comes with its declaration of conformity.
VIZ-R2 and VIZ-R2 PLUS helmets
Laser protection marked to EN 207:2017: D LB7 and IR LB8 from 900 to 1080 nm. Welding filter to EN ISO 16321.
IPRO-AMBER glasses
Compliant with ANSI Z87.1 and EN 207. OD8+ from 847 to 1080 nm, OD6+ from 1080 to 1100 nm.
THEO Bay
CE marked. Ships with its EU declaration of conformity, certificates to EN 12254 and a test report to EN 60825.
Built by Maxphotonics
Laser makers since 2004
THEO is backed by Maxphotonics, a laser manufacturer since 2004 that produces more than 200,000 units a year.
Warranty
Register it. Get two years.
Applies to the MA1 Series. TD1 Dual Wire Feeder, VIZ-R2 helmets and THEO Bay carry a one-year warranty.
2 years, registered
Machine body, welding torch and laser source are covered for two years once you register your machine.
1 year, unregistered
Skip the registration and the same parts are covered for one year. So register.
Not covered
Wear parts and accessories: nozzles, protective windows, cables and pipes.
Service
Stuck? Talk to a person.
Service teams work from Westborough (USA), Gilching (Germany) and Williamstown North (Australia). If you bought through a THEO Partner, your partner is your first call.
Asked by safety officers
Can I get the declaration of conformity for my machine?
Yes. Tell us the model and your country and we send it.
Is the MA1 a Class 4 laser product?
Yes. So is the TM Series. Class 4 means you need laser safety eyewear, a controlled work area and trained operators.
Is THEO “FDA approved”?
No laser welder is. The FDA does not approve industrial lasers; manufacturers file a product report and receive an accession number. THEO’s are on file.
When does the warranty start?
On the day of delivery, unless your contract says otherwise.
Does registration really change the warranty?
Yes. Registered machines get two years, unregistered ones get one.