Dual Wire Feeder
Laser welding competes with MIG/MAG.
With 1.2 mm and 1.6 mm wire, the Dual Wire Feeder bridges the gap between the high speed and high deposition of MIG/MAG welding and the precision and minimal distortion of laser welding.
Dual Wire Feeder
Why you’ll love the Dual Wire Feeder.
Higher productivity
Two spools of filler wire mean faster material deposition, shorter cycle times and more throughput.
Better weld quality
A consistent material supply closes wide gaps (4 mm) and increases the weld’s strength. You can achieve Class B A-dimensions.
Flexibility in applications
Suitable for a wide range of materials and thicknesses (up to 10 mm), it adapts easily to different production needs.
Cost efficiency
Less rework and optimized wire usage lower overall material and operating costs.
Ease of use
The welder can handle double wire feeding without additional manual skills.
TD1 Dual Wire Feeder
Technical data
- Wires
- One or two
- Wire diameters
- 1.2 / 1.6 mm
- Wire materials
- Stainless steel, carbon steel, aluminum
- Wire feed speed
- 2 to 50 mm/s
- Power supply
- 24 V DC
- Dimensions (L × W × H)
- 580 × 433.5 × 270 mm
- Ingress protection
- IP20
- Compliance
- CE (Machinery, EMC), RoHS, WEEE, FCC Part 15 Class A
For more information on buying the Dual Wire Feeder, talk to an expert.
Get a quoteT1 Wire Feeder
One wire, for typical TIG jobs
The Dual Wire Feeder is built for typical MIG/MAG jobs: when the specs call for wider and deeper welds, a dual wire gets the job done. For the work you do with TIG today, the T1 Wire Feeder is the one: a single wire from 0.8 to 1.6 mm, in sync with your MA1.

Single or dual
Which wire feeder fits the job?
| T1 Wire Feeder | Dual Wire Feeder | |
|---|---|---|
| Wires | One | One or two |
| Wire diameters | 0.8 / 1.0 / 1.2 / 1.6 mm | 1.2 / 1.6 mm |
| Wire materials | Stainless steel, aluminum, carbon steel | Stainless steel, carbon steel, aluminum |
| Built for | Typical TIG jobs | Wider and deeper welds, typical MIG/MAG jobs |
| Works with | MA1 Series | MA1 Series |
| Dual Wire Feeder | T1 Wire Feeder | |
|---|---|---|
| Wires | One or two | One |
| Wire diameters | 1.2 / 1.6 mm | 0.8 / 1.0 / 1.2 / 1.6 mm |
| Wire materials | Stainless steel, carbon steel, aluminum | Stainless steel, aluminum, carbon steel |
| Built for | Wider and deeper welds, typical MIG/MAG jobs | Typical TIG jobs |
| Works with | MA1 Series | MA1 Series |
Swipe sideways to compare →
Dual Wire Feeder FAQ
What kind of wire can be used with the Dual Wire Feeder?
Solid welding wire with a diameter of 1.2 or 1.6 mm, in stainless steel, carbon steel or aluminum.
Is the Dual Wire Feeder included with the MA1?
No. Only the T1 Wire Feeder is included in every MA1 purchase.
When is the T1 Wire Feeder enough?
The T1 Wire Feeder can replace typical TIG jobs. The Dual Wire Feeder is for wider and deeper welds, the kind of work that is done with MIG/MAG today.
Does the Dual Wire Feeder work with other laser welders?
No. It is built for the THEO MA1 Series and is for use with an MA1 only.
Where do I find the manual?
In the knowledge base: the TD1 Wire Feeder Operator Manual.
You may be interested in
Dual Wire Feeder and MA1 ULTRA. Match made in heaven.
The MA1 ULTRA is engineered for professionals who demand extra depth and efficiency. It delivers deeper welds, reduced heat and more power for tougher materials.
Laser welding
The advantage of laser welding. In your hands.
Laser welding outperforms traditional methods like TIG and MIG welding in several key areas. Weld up to 10x faster and get more done.
Talk to an expert
For more information on buying the Dual Wire Feeder, contact us.