Opens in a new tab

UK sales & service by THEO Partner Wilkinson Star

Book a UK demo

Handheld laser welding up to 8.5 mm

The UK’s go‑to handheld laser welder. THEO MA1

Up to 10× faster than TIG on stainless
Four models from 3.5 mm to 8.5 mm penetration in stainless
Up to 8.5 mm with the MA1 ULTRA
Prices from £9,999 (+ VAT)

CEIEC 60825‑1Class 4 laser product

UK sales, service and support by

Welding experts since 1983, Manchester
50+ dealers across the UK
UK stock of machines, torches and consumables
Service, spares and operator training in the UK
Book a UK demo
Wilkinson Star engineer welding in the demo van
1 / 2 · Wilkinson Star engineer welding with the MA1 in the demo van
The THEO Academy van
2 / 2 · The THEO Academy van — demos and laser-safety training, brought to your workshop by Wilkinson Star

The MA1 Advantages

TIG, MIG and THEO Laser Welding Compared

What it means in the shop TIG MIG Laser welding: THEO
Speed on 1–4 mm stainless Slow, high skill Fast, spatter Fastest. One pass and done
Heat input and distortion High High Low. Thin sheet stays flat
Finish after welding Clean, but slow Grinding and cleanup Bright, narrow bead. Usually no post-processing
Training a competent welder At least 6 months About 3–6 months One week
Materials Most Most Stainless, mild, galvanised, aluminium, nickel alloys, titanium
Cooling and setup Water-cooled; torch and tungsten electrode, argon shielding gas; foot pedal or thumb control; ground clamp; filler rod Air-cooled or water-cooled; wire feeder, MIG gun and contact tip; shielding gas; ground clamp; wire spool Air-cooled; shielding gas; light-weight welding torch; laser safety enclosure
Energy consumption High High Lower. Up to 80% less energy
What it means in the shop Laser welding: THEO TIG MIG
Speed on 1–4 mm stainless Fastest. One pass and done Slow, high skill Fast, spatter
Heat input and distortion Low. Thin sheet stays flat High High
Finish after welding Bright, narrow bead. Usually no post-processing Clean, but slow Grinding and cleanup
Training a competent welder One week At least 6 months About 3–6 months
Materials Stainless, mild, galvanised, aluminium, nickel alloys, titanium Most Most
Cooling and setup Air-cooled; shielding gas; light-weight welding torch; laser safety enclosure Water-cooled; torch and tungsten electrode, argon shielding gas; foot pedal or thumb control; ground clamp; filler rod Air-cooled or water-cooled; wire feeder, MIG gun and contact tip; shielding gas; ground clamp; wire spool
Energy consumption Lower. Up to 80% less energy High High

Swipe sideways for TIG and MIG →

THE THEO MA1 LASER WELDER IN ACTION

IT'S A TIME SAVER.

QUALITY WELDS IN 30 SECONDS

The Weld Off — TIG versus THEO

Which MA1 is right for your work?

Four models. Pick by the thickest material you weld.

All four models share the same torch, touchscreen and Maxphotonics air-cooled fibre core.

THEO MA1‑35

MA1‑35

3.5 mm max penetration (stainless)

800W laser output · 29 kg

Best for: Thin-gauge stainless, sheet-metal and mobile work; the lightest entry into laser welding

from £9,999+ VAT

Get a quote
THEO MA1‑45

MA1‑45

4.5 mm max penetration (stainless)

1200W laser output · 38 kg

Best for: General fabrication up to 4.5 mm with headroom on stainless and aluminium

from £13,999+ VAT

Get a quote
THEO MA1‑65

MA1‑65

6.5 mm max penetration (stainless)

1500W laser output · 39 kg

Best for: Most UK fab shops: stainless and mild steel to 6.5 mm, replaces a TIG station

from £18,499+ VAT

Get a quote
THEO MA1 ULTRA

MA1 ULTRA

8.5 mm max penetration (stainless)

2000W laser output · 42 kg

Best for: Heavy sections, structural and high duty-cycle production — the deepest handheld weld in the range

from £22,499+ VAT

Get a quote

Ready for your MA1?

Weld your own parts on a demo unit at your workshop

Reviews

What they say about the THEO MA1

“These are awesome machines with awesome results. You can get any other machine on the market, and it will not weld as good as a THEO.”

Tyson NelsonOwner, Fine Iron LLC, USA

“The quality of the welding seams: my clients are ecstatic when they see the MA1 in action.”

Michał PuchcińskiProduct Specialist, RYWAL-RHC Sp. z o.o., Poland

“The operating system is quite simple and much easier to program than other laser welders. So it’s easier for a welder to switch from TIG/MIG to THEO than from TIG/MIG to another laser welding brand.”

Andy González LópezDirector of Operations, CADITEC S.L.U, Spain

“The laser torch is very light, ergonomic to weld with. You can hold it for a whole day without feeling any fatigue in your wrist.”

Benjamin GaytantOwner, BGA Laser Welding, Belgium

Before you book

Will it work in my workshop?

Three questions every fabricator asks before the demo — answered up front.

PowerSingle-phase 220 V. The MA1‑35 runs on a 16 A supply, the MA1‑45, ‑65 and ULTRA on 32 A. No three-phase, no chiller.
SafetyClass 4 laser: you need a screened bay or laser curtains, laser-safety glasses and fume extraction. Your dealer checks the setup at commissioning.
Learning curveA new skill, not no skill. Experienced TIG or MIG welders lay acceptable beads within hours and are proficient in about a week; weld recipes per material and thickness do the parameter work.

THEO MA1 FAQ

What materials can the MA1 Handheld Laser Welding System weld?

The MA1 series can weld a variety of materials including carbon steel, stainless steel, aluminium, non-ferrous metals, and other alloys. For detailed information on materials and supported welding depths, please download our product brochure.

What should I consider regarding safety?

While the ideal scenario for operating the MA1 series is in a separate room, necessary safety can also be achieved with the use of laser safety curtains. Appropriate laser safety glasses are needed to protect the operator’s eyes during the welding process. We also recommend the use of gloves, long sleeves, and appropriate work boots for additional protection. In some countries, including Germany, a designated laser safety officer is required within the company to ensure all safety protocols are being followed. Safety regulations can vary by region. Our solution expert partners are well-versed in local safety requirements and are more than happy to guide you through the safety protocols applicable in your specific region, ensuring your operations are both safe and compliant.

What certifications does the MA1 series hold?

The MA1 series holds several certifications including EN 60204-1, EN 60825-1, ISO 11553-2, ISO 12100, EN IEC 61000-6-2, and EN IEC 61000-6-4.

What maintenance is required for the MA1 Handheld Laser Welding System?

The MA1 series requires low maintenance, thanks to its air-cooled design which eliminates the need for frequent upkeep and reduces downtime.

What warranty comes with the MA1?

Two years on machine, torch and laser source when you register (one year unregistered). Protective lenses and nozzles are consumables.

How does the demo work?

Bring your own parts. You weld your material on a demo unit — at your workshop, online, or at a Wilkinson Star dealer near your postcode.

Who installs the machine and trains our welders?

Wilkinson Star or your local dealer commissions the machine and trains your welders on site. Spares and consumables come from UK stock.

Let’s get you started

Book your UK demo

Three questions about your work, and a THEO engineer calls you back within one working day with a price ex VAT and a demo date.

Rather talk now? +44 20 8142 9895 (Mon–Fri 9–5)

Your contact details

Takes about 2 minutes. Fields marked * are required.

A real person replies within one working day.

We use your details to answer your request — nothing else. Privacy Policy

Your contact details

Takes about 2 minutes. Fields marked * are required.

A real person replies within one working day.