{"id":17169,"date":"2026-11-13T00:28:09","date_gmt":"2026-11-13T00:28:09","guid":{"rendered":"https:\/\/go.theo.inc\/?post_type=docs&#038;p=17169"},"modified":"2026-11-13T00:28:09","modified_gmt":"2026-11-13T00:28:09","password":"","slug":"ma1-operator-handbook","status":"publish","type":"docs","link":"https:\/\/go.theo.inc\/de\/knowledge-base\/ma1-operator-handbook\/","title":{"rendered":"THEO MA1 Betriebsanleitung"},"content":{"rendered":"<p class=\"wp-block-paragraph\"><strong>THEO ACADEMY  \u00b7  MA1 SERIES<\/strong><br><strong>OPERATOR TRAINING HANDBOOK<\/strong><br><strong>SAFE OPERATION OF THEO MA1 HAND-HELD LASER WELDERS<\/strong><br>Training content according to Regulation (EU) 2023\/1230 and ISO 11553-2:2026<br><strong>MA1-35  \u00b7  MA1-45  \u00b7  MA1-65  \u00b7  MA1 ULTRA<\/strong><br>Edition 1.0 \u00b7 13 November 2026<br><strong>by MAXPHOTONICS<\/strong><\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-intro.jpg\" alt=\"About this handbook\" width=\"1600\" height=\"462\" class=\"wp-image-17170\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-intro.jpg 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-intro-600x173.jpg 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-intro-1024x296.jpg 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-intro-768x222.jpg 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-intro-1536x444.jpg 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-intro-18x5.jpg 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>INTRODUCTION<\/strong><\/p>\n\n\n\n<h2 id=\"about-this-handbook\" class=\"wp-block-heading\">ABOUT THIS HANDBOOK<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>ONE PATH. EVERY OPERATOR. PROOF ON PAPER.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">What to know, what to do, and how to prove it \u2013 for every MA1 operator.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This handbook structures the operator training for THEO MA1 series hand-held laser welding systems. It combines the MA1 operating manual with the THEO Safety, Application and Service workshops into one path that ends with a documented result: a trained operator, an activated machine and a signed training record.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td><strong>1080 nm<\/strong><\/td>\n<td>Invisible infrared laser radiation<\/td>\n<\/tr>\n<tr>\n<td><strong>CLASS 4<\/strong><\/td>\n<td>Laser product per EN 60825-1<\/td>\n<\/tr>\n<tr>\n<td><strong>118\u2013282 m<\/strong><\/td>\n<td>NOHD, depending on model<\/td>\n<\/tr>\n<tr>\n<td><strong>1 PERSON<\/strong><\/td>\n<td>Operates the laser welder<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">SCOPE AND AUDIENCE<\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td><strong>Machines<\/strong><\/td>\n<td>THEO MA1-35, MA1-45, MA1-65 and MA1 ULTRA, each with the T1 wire feeder<\/td>\n<\/tr>\n<tr>\n<td><strong>Participants<\/strong><\/td>\n<td>Operators at the end customer who will set up, operate and care for the MA1<\/td>\n<\/tr>\n<tr>\n<td><strong>Trainers<\/strong><\/td>\n<td>THEO Academy, THEO application engineers and authorized THEO trade and service partners<\/td>\n<\/tr>\n<tr>\n<td><strong>Reference<\/strong><\/td>\n<td>Operating manual \u201cSerie MA1\u201d (translation of the original operating manual), version 2.0<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td><strong>IMPORTANT<\/strong><br>This handbook supports training. It does not replace the operating manual. Every participant reads the operating manual before the practical part. Where the two differ, <strong>the operating manual prevails<\/strong>.<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">WHY TRAINING IS MANDATORY<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Hand-held laser welding puts the beam in a person\u2019s hand. The MA1 reduces risks by design, but residual risks remain. They are controlled by the workplace, by organisation and by a trained operator. The following requirements define what this training has to cover.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Requirement<\/th>\n<th>Quelle<\/th>\n<th>Covered in<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Instructions for putting into service and use, including training of operators where necessary<\/td>\n<td>Regulation (EU) 2023\/1230, Annex III, 1.7.4.2<\/td>\n<td>Modules 4, 5; training path<\/td>\n<\/tr>\n<tr>\n<td>Residual risks and protective measures to be taken by the user, including PPE<\/td>\n<td>Regulation (EU) 2023\/1230, Annex III, 1.7.4.2<\/td>\n<td>Modules 2, 3<\/td>\n<\/tr>\n<tr>\n<td>Operating method in the event of accident or breakdown<\/td>\n<td>Regulation (EU) 2023\/1230, Annex III, 1.7.4.2<\/td>\n<td>Module 7<\/td>\n<\/tr>\n<tr>\n<td>Adjustment and maintenance by the user, preventive maintenance<\/td>\n<td>Regulation (EU) 2023\/1230, Annex III, 1.7.4.2<\/td>\n<td>Module 6<\/td>\n<\/tr>\n<tr>\n<td>Emission of non-ionising radiation and of hazardous substances (fumes)<\/td>\n<td>Regulation (EU) 2023\/1230, Annex III, 1.7.4.2<\/td>\n<td>Modules 1, 2, 3<\/td>\n<\/tr>\n<tr>\n<td>Information for use on safe operation, PPE and emergency procedures for hand-held laser processing machines<\/td>\n<td>ISO 11553-2:2026<\/td>\n<td>Modules 1\u20137<\/td>\n<\/tr>\n<tr>\n<td>Operation only by qualified personnel who completed the THEO training; machine activation by authorization code<\/td>\n<td>MA1 operating manual, 2.4.2, 2.6.2, 4.2<\/td>\n<td>Training path; record<\/td>\n<\/tr>\n<tr>\n<td>Instruction of employees on hazards and protective measures by the employer<\/td>\n<td>National occupational safety law<\/td>\n<td>Training record<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td><strong>REGULATORY STATUS<\/strong><br><strong>Regulation (EU) 2023\/1230<\/strong> applies from 20 January 2027 and replaces the Machinery Directive 2006\/42\/EC.<br><strong>ISO 11553-2:2026<\/strong> (edition 2, published August 2026) replaces ISO 11553-2:2007. Its principle: safety is designed into the machine first; information for use and training cover what design cannot remove.<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">ROLES AND RESPONSIBILITIES<\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Role<\/th>\n<th>Responsibility<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Employer<\/strong><\/td>\n<td>Risk assessment, laser controlled area, PPE, appointment of a laser safety officer where required, instruction of employees, training records<\/td>\n<\/tr>\n<tr>\n<td><strong>Laser safety officer<\/strong><\/td>\n<td>Supports the employer with the risk assessment, the safety measures and the monitoring of safe laser operation; works with the occupational safety specialist and the company physician<\/td>\n<\/tr>\n<tr>\n<td><strong>Operator<\/strong><\/td>\n<td>Completes the training, works only as trained, wears PPE, checks the machine before use, reports defects<\/td>\n<\/tr>\n<tr>\n<td><strong>Trainer<\/strong><\/td>\n<td>Runs the practical instruction, assesses competence, signs the training record<\/td>\n<\/tr>\n<tr>\n<td><strong>THEO \/ Maxphotonics<\/strong><\/td>\n<td>Operating manual, THEO Academy, authorization code, spare parts and service<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">TRAINING PATH<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Every operator completes all seven steps before welding unsupervised. Steps 1\u20134 run online at the THEO Academy (academy.theo.inc); the machine stays locked until the authorization code is entered.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-training-path.png\" alt=\"Training path in seven steps\" width=\"1600\" height=\"331\" class=\"wp-image-17171\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-training-path.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-training-path-600x124.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-training-path-1024x212.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-training-path-768x159.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-training-path-1536x318.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-training-path-18x4.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">MODULES AT A GLANCE<\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Module<\/th>\n<th>Content<\/th>\n<th>Suggested time<\/th>\n<th>Method<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>1  Laser basics<\/strong><\/td>\n<td>How the MA1 works, laser classes, eye and skin hazards, NOHD, reflections<\/td>\n<td>30 min<\/td>\n<td>Online, classroom<\/td>\n<\/tr>\n<tr>\n<td><strong>2  Hazards and residual risks<\/strong><\/td>\n<td>Radiation, fumes, fire, gas, electricity, noise; intended use and misuse<\/td>\n<td>30 min<\/td>\n<td>Online, classroom<\/td>\n<\/tr>\n<tr>\n<td><strong>3  Protective measures<\/strong><\/td>\n<td>MA1 safety functions, laser workplace, PPE, laser safety officer<\/td>\n<td>45 min<\/td>\n<td>Classroom, walk-through<\/td>\n<\/tr>\n<tr>\n<td><strong>4  System and set-up<\/strong><\/td>\n<td>Components, connections, gas, grounding, wire feeder, focus, activation<\/td>\n<td>45 min<\/td>\n<td>Hands-on<\/td>\n<\/tr>\n<tr>\n<td><strong>5  Safe operation<\/strong><\/td>\n<td>Daily check, start-up, parameters, torch handling, shut-down<\/td>\n<td>60 min<\/td>\n<td>Hands-on<\/td>\n<\/tr>\n<tr>\n<td><strong>6  Care and wear parts<\/strong><\/td>\n<td>Clean-first rule, protective window, nozzles, intervals<\/td>\n<td>30 min<\/td>\n<td>Hands-on<\/td>\n<\/tr>\n<tr>\n<td><strong>7  Faults and emergencies<\/strong><\/td>\n<td>Accident and fire, alarms, service contact<\/td>\n<td>20 min<\/td>\n<td>Classroom, drill<\/td>\n<\/tr>\n<tr>\n<td><strong>8  Competence check<\/strong><\/td>\n<td>Knowledge check and practical assessment, training record<\/td>\n<td>30 min<\/td>\n<td>Assessment<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m1.jpg\" alt=\"Know the beam\" width=\"1600\" height=\"462\" class=\"wp-image-17172\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m1.jpg 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m1-600x173.jpg 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m1-1024x296.jpg 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m1-768x222.jpg 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m1-1536x444.jpg 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m1-18x5.jpg 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>MODULE 01 \u00b7 LASER BASICS<\/strong><\/p>\n\n\n\n<h2 id=\"know-the-beam\" class=\"wp-block-heading\">KNOW THE BEAM<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>1080 NM. INVISIBLE. CLASS 4.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">What the MA1 emits, why it is dangerous and how far the danger reaches.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">HOW THE MA1 MAKES LIGHT<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The MA1 is a fiber laser. Pump diodes feed light into an active fiber, which turns it into laser light. The armored fiber cable in the hose pack carries the beam to the torch. There, the optics collimate it, let it oscillate (wobble) and focus it onto the workpiece.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-beam-path.png\" alt=\"Beam path of the MA1\" width=\"1600\" height=\"332\" class=\"wp-image-17174\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-beam-path.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-beam-path-600x125.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-beam-path-1024x212.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-beam-path-768x159.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-beam-path-1536x319.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-beam-path-18x4.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Laser light differs from the light of a lamp: it is coherent, spectrally pure and can be focused to an extreme power density. That is what makes it weld \u2013 and what makes it hazardous at a great distance.<\/p>\n\n\n\n<h4 class=\"wp-block-heading\">INSIDE THE TORCH<\/h4>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-optics.png\" alt=\"Optical path inside the torch\" width=\"1600\" height=\"747\" class=\"wp-image-17175\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-optics.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-optics-600x280.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-optics-1024x478.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-optics-768x359.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-optics-1536x717.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-optics-18x8.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">LASER CLASSES<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Lasers are classified by EN 60825-1 according to the accessible radiation. The higher the class, the higher the hazard and the more protective measures are required.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Class<\/th>\n<th>Hazard<\/th>\n<th>What it means<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>1<\/td>\n<td>Safe under reasonably foreseeable conditions<\/td>\n<td>Glare and secondary accidents are possible<\/td>\n<\/tr>\n<tr>\n<td>1M \/ 2M<\/td>\n<td>Safe for the naked eye<\/td>\n<td>Hazardous when viewed with optical instruments<\/td>\n<\/tr>\n<tr>\n<td>2<\/td>\n<td>Visible radiation, safe for short exposure (up to 0.25 s)<\/td>\n<td>Do not stare into the beam<\/td>\n<\/tr>\n<tr>\n<td>3R<\/td>\n<td>Eye hazard<\/td>\n<td>Operating instruction and laser safety officer required<\/td>\n<\/tr>\n<tr>\n<td>3B<\/td>\n<td>Eye hazard, skin hazard possible<\/td>\n<td>Operating instruction and laser safety officer required<\/td>\n<\/tr>\n<tr>\n<td><strong>4<\/strong><\/td>\n<td><strong>Eye and skin hazard, also from diffuse reflection; fire hazard<\/strong><\/td>\n<td><strong>All MA1 models. Full protective measures and trained personnel<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Unclassified laser devices without an identifiable laser class must not be used. The red pilot laser of the MA1 is a visible, low-power aiming beam; do not look into it either.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">EYES AND SKIN<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-eye.png\" alt=\"Wavelengths and the eye\" width=\"1600\" height=\"588\" class=\"wp-image-17176\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-eye.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-eye-600x221.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-eye-1024x376.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-eye-768x282.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-eye-1536x564.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-eye-18x7.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Target<\/th>\n<th>Effect<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Eye \u2013 retina<\/strong><\/td>\n<td>Radiation between 400 and 1400 nm passes the cornea and is focused on the retina. The MA1 works at 1080 nm: invisible, no blink reflex, permanent damage within fractions of a second.<\/td>\n<\/tr>\n<tr>\n<td><strong>Eye \u2013 cornea and lens<\/strong><\/td>\n<td>UV radiation and \u201cblue light\u201d from the welding plasma cause conjunctivitis and photochemical damage. Symptoms: blurred vision, burning, tears, a feeling of sand in the eyes.<\/td>\n<\/tr>\n<tr>\n<td><strong>Skin<\/strong><\/td>\n<td>Above 45 \u00b0C tissue dies, above 150 \u00b0C it carbonises, above 300 \u00b0C it vaporises. Infrared and UV radiation cause burns and increase the risk of skin cancer.<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-skin.png\" alt=\"Skin damage by temperature\" width=\"1600\" height=\"197\" class=\"wp-image-17177\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-skin.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-skin-600x74.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-skin-1024x126.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-skin-768x95.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-skin-1536x189.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-skin-18x2.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">HOW FAR THE DANGER REACHES<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Die <strong>nominal ocular hazard distance (NOHD)<\/strong> is the distance within which the direct beam can damage the eye. For the MA1 series it is far longer than any workshop. The beam must therefore always be contained by the enclosure, walls or curtains of the laser controlled area.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Model<\/th>\n<th>Output power<\/th>\n<th>NOHD<\/th>\n<th>NHZ<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>MA1-35<\/strong><\/td>\n<td>~800 W<\/td>\n<td>118 m<\/td>\n<td>22 m<\/td>\n<\/tr>\n<tr>\n<td><strong>MA1-45<\/strong><\/td>\n<td>~1,200 W<\/td>\n<td>144 m<\/td>\n<td>27 m<\/td>\n<\/tr>\n<tr>\n<td><strong>MA1-65<\/strong><\/td>\n<td>~1,500 W<\/td>\n<td>178 m<\/td>\n<td>34 m<\/td>\n<\/tr>\n<tr>\n<td><strong>MA1 ULTRA<\/strong><\/td>\n<td>~2,000 W<\/td>\n<td>282 m<\/td>\n<td>53 m<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Source: MA1 operating manual, 11.2. NHZ = nominal hazard zone as stated in the operating manual.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">REFLECTIONS<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">When the beam hits a surface, part of it is absorbed and turns into heat, part is transmitted and part is reflected. Shiny surfaces reflect like a mirror (specular reflection), matt surfaces scatter the beam in all directions (diffuse reflection). With a class 4 laser, both are hazardous.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-reflect.png\" alt=\"Direct, specular and diffuse reflection\" width=\"1600\" height=\"492\" class=\"wp-image-17178\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-reflect.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-reflect-600x185.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-reflect-1024x315.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-reflect-768x236.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-reflect-1536x472.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-reflect-18x6.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<ul class=\"wp-block-list\">\n\n<li>Aluminium and copper reflect a large part of the beam. Take special care.<\/li>\n\n\n<li>Wrong parameters and a wrong torch angle increase reflections.<\/li>\n\n\n<li>Know the expected reflection cone of every part and keep your body out of it.<\/li>\n\n<\/ul>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td><strong>INVISIBLE DOES NOT MEAN HARMLESS. LASER ENABLED MEANS THE BEAM IS THERE.<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m2.jpg\" alt=\"Know the risks\" width=\"1600\" height=\"462\" class=\"wp-image-17179\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m2.jpg 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m2-600x173.jpg 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m2-1024x296.jpg 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m2-768x222.jpg 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m2-1536x444.jpg 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m2-18x5.jpg 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>MODULE 02 \u00b7 HAZARDS AND RESIDUAL RISKS<\/strong><\/p>\n\n\n\n<h2 id=\"know-the-risks\" class=\"wp-block-heading\">KNOW THE RISKS<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>BUILT SAFE. THESE RISKS REMAIN.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The MA1 is designed for safety. What design cannot remove, you control.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">INTENDED USE<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The MA1 laser welding system is a machine for the manual welding and soldering of steel, stainless steel, aluminium and similar materials. It is intended <strong>only for commercial use in an industrial environment, indoors<\/strong>. It is not intended for private use.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">RESIDUAL RISKS AND YOUR PROTECTION<\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Hazard<\/th>\n<th>What can happen<\/th>\n<th>Protection<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Laser radiation, direct<\/strong><\/td>\n<td>Permanent eye damage, burns<\/td>\n<td>Laser controlled area, PPE, never point the torch at persons<\/td>\n<\/tr>\n<tr>\n<td><strong>Reflected and scattered radiation<\/strong><\/td>\n<td>Eye and skin damage, also at an angle and at a distance<\/td>\n<td>Stay behind the torch, correct angle and parameters, PPE for everyone in the area<\/td>\n<\/tr>\n<tr>\n<td><strong>UV and blue light from the plasma<\/strong><\/td>\n<td>Conjunctivitis, retinal damage, sunburn-like skin reactions<\/td>\n<td>Laser welding helmet, closed clothing; see a physician if symptoms occur<\/td>\n<\/tr>\n<tr>\n<td><strong>Welding fumes and gases<\/strong><\/td>\n<td>Damage to lungs, heart, kidneys, nervous system; ozone and nitrogen oxides; shielding gas displaces air<\/td>\n<td>Extraction at the source, ventilation, safety data sheets, respiratory protection where needed, head out of the fumes<\/td>\n<\/tr>\n<tr>\n<td><strong>Fire and explosion<\/strong><\/td>\n<td>Ignition of combustibles, solvents, containers<\/td>\n<td>No combustible material in the area, never weld on containers with unknown content, fire extinguisher at hand<\/td>\n<\/tr>\n<tr>\n<td><strong>Gas cylinders<\/strong><\/td>\n<td>Explosion if damaged or heated<\/td>\n<td>Upright, secured, away from heat and sparks, suitable regulator<\/td>\n<\/tr>\n<tr>\n<td><strong>Electricity (200\u2013240 V)<\/strong><\/td>\n<td>Electric shock, burns<\/td>\n<td>Grounded supply, intact cables, never open the machine<\/td>\n<\/tr>\n<tr>\n<td><strong>Hot workpieces<\/strong><\/td>\n<td>Burns<\/td>\n<td>Gloves; never set parts down where the laser can pass through<\/td>\n<\/tr>\n<tr>\n<td><strong>Noise, 85 dB(A)<\/strong><\/td>\n<td>Hearing damage<\/td>\n<td>Hearing protection<\/td>\n<\/tr>\n<tr>\n<td><strong>Welding wire<\/strong><\/td>\n<td>Eye injury when threading or moving the wire<\/td>\n<td>Never look into the liner, its outlet or the wire nozzle; safety goggles<\/td>\n<\/tr>\n<tr>\n<td><strong>Set-up and transport<\/strong><\/td>\n<td>Tipping, rolling, tripping; 29\u201342 kg machine weight<\/td>\n<td>Two persons, level floor, brakes on, cables without loops<\/td>\n<\/tr>\n<tr>\n<td><strong>Overheating<\/strong><\/td>\n<td>Ageing, loss of power, alarm stop<\/td>\n<td>0\u201340 \u00b0C ambient, free air intake, 1 m clear around the machine<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">NEVER<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">These practices are foreseeable misuse. Each of them has caused accidents with hand-held lasers.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n\n<li>Operate the laser without the safety equipment specified by the manufacturer \u2013 or without PPE.<\/li>\n\n\n<li>Manipulate, bypass or disable safety equipment such as the loop cable, key switch or interlock.<\/li>\n\n\n<li>Point the torch at persons. The laser points at the work surface only.<\/li>\n\n\n<li>Let untrained persons, children or persons who cannot operate the machine safely use it.<\/li>\n\n\n<li>Weld in unventilated spaces, in explosive atmospheres or near combustible liquids and gases. The MA1 has no Ex protection.<\/li>\n\n\n<li>Open, disassemble, modify or extend the machine or its electrical system.<\/li>\n\n\n<li>Use the machine when damaged, especially the torch or safety equipment.<\/li>\n\n\n<li>Exceed the operating parameters stipulated by the manufacturer.<\/li>\n\n\n<li>Expose the machine to strong magnets, rapid temperature changes, humidity or wet environments.<\/li>\n\n<\/ul>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td><strong>A SAFETY FUNCTION IN YOUR WAY? STOP AND ASK. NEVER BYPASS IT.<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m3.jpg\" alt=\"Protect people\" width=\"1600\" height=\"462\" class=\"wp-image-17180\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m3.jpg 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m3-600x173.jpg 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m3-1024x296.jpg 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m3-768x222.jpg 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m3-1536x444.jpg 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m3-18x5.jpg 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>MODULE 03 \u00b7 PROTECTIVE MEASURES<\/strong><\/p>\n\n\n\n<h2 id=\"protect-people\" class=\"wp-block-heading\">PROTECT PEOPLE<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>DESIGN FIRST. PPE LAST. NEVER PPE ONLY.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Machine, workplace, organisation, personal protection \u2013 in this order.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Protective measures follow a fixed order. Measures built into the machine and the workplace act without anyone having to remember them. PPE is the last line of defence \u2013 essential, but never the only one.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-measures.png\" alt=\"Hierarchy of protective measures\" width=\"1600\" height=\"569\" class=\"wp-image-17181\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-measures.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-measures-600x213.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-measures-1024x364.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-measures-768x273.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-measures-1536x546.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-measures-18x6.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">SAFETY FUNCTIONS OF THE MA1<\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Function<\/th>\n<th>What it does<\/th>\n<th>Operator check<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Safety key switch<\/strong><\/td>\n<td>Without the key in position 1, the machine powers on but the laser cannot be operated<\/td>\n<td>Key removed when not in use<\/td>\n<\/tr>\n<tr>\n<td><strong>Authorization code<\/strong><\/td>\n<td>Machine works only after successful training and code entry<\/td>\n<td>Code valid; renew before expiry<\/td>\n<\/tr>\n<tr>\n<td><strong>Workpiece contact (loop cable)<\/strong><\/td>\n<td>Laser emits only when the nozzle touches the workpiece and the trigger is pressed<\/td>\n<td>Clamp on the workpiece; Torch Switch status green on contact<\/td>\n<\/tr>\n<tr>\n<td><strong>Emergency stop<\/strong><\/td>\n<td>Switches the laser off immediately and latches; release by turning<\/td>\n<td>Free access, \u201cEmergency stop active!\u201d clears after release<\/td>\n<\/tr>\n<tr>\n<td><strong>Interlock interface (EX-CTRL)<\/strong><\/td>\n<td>Two-channel input for the door contact; laser cannot start while the circuit is open<\/td>\n<td>Door closed, Safety Lock status green<\/td>\n<\/tr>\n<tr>\n<td><strong>Fiber break detection<\/strong><\/td>\n<td>Detects a broken fiber within 20 ms<\/td>\n<td>Never kink the hose pack; bend radius \u2265 200 mm<\/td>\n<\/tr>\n<tr>\n<td><strong>Indicators<\/strong><\/td>\n<td>Torch LED and status signal show fault, standby and emission<\/td>\n<td>Know the states before welding<\/td>\n<\/tr>\n<tr>\n<td><strong>Monitoring<\/strong><\/td>\n<td>Alarms for gas pressure, protective window temperature, grounding, overheating<\/td>\n<td>Read the Warning tab; act as in Module 7<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h4 class=\"wp-block-heading\">WHEN DOES THE LASER EMIT?<\/h4>\n\n\n\n<p class=\"wp-block-paragraph\">The MA1 releases the beam only when every safety condition is met at the same time.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-emission.png\" alt=\"Conditions for laser emission\" width=\"1600\" height=\"620\" class=\"wp-image-17182\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-emission.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-emission-600x233.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-emission-1024x397.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-emission-768x298.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-emission-1536x595.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-emission-18x7.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">THE LASER WORKPLACE<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The MA1 may only be operated in a laser welding cell or in an enclosure with interlocked safety devices. Setting up and maintaining this area is the employer\u2019s responsibility; the operator checks it before every shift.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-workplace.png\" alt=\"Laser workplace floor plan\" width=\"1600\" height=\"806\" class=\"wp-image-17183\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-workplace.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-workplace-600x302.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-workplace-1024x516.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-workplace-768x387.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-workplace-1536x774.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-workplace-18x9.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<ul class=\"wp-block-list\">\n\n<li><strong>Enclosure:<\/strong> laser protection booth, laser safety curtain or partition wall as per IEC 60825-4. Viewing panels only if rated for the laser.<\/li>\n\n\n<li><strong>Access:<\/strong> interlocked door connected to the EX-CTRL interface. The door contact switches the laser off on entry.<\/li>\n\n\n<li><strong>Signals:<\/strong> emission warning lights at every entrance; laser warning signs (class 4) outside at all access points, legible without exposure.<\/li>\n\n\n<li><strong>Air:<\/strong> fume extraction positioned directly at the welding zone; fresh air supply where needed.<\/li>\n\n\n<li><strong>Fire:<\/strong> fire extinguisher close by; work table free of debris, combustibles and reflective objects.<\/li>\n\n\n<li><strong>PPE:<\/strong> eyewear stored at the entrance, so nobody enters unprotected.<\/li>\n\n\n<li><strong>Light and space:<\/strong> no dark environments; sufficient room, traffic and escape routes; unauthorized persons stay out.<\/li>\n\n<\/ul>\n\n\n\n<h4 class=\"wp-block-heading\">DANGER ZONE<\/h4>\n\n\n\n<p class=\"wp-block-paragraph\">During welding, the entire area in front of the torch is the danger zone. Only the operator works at the workpiece. Everyone else stays behind the torch and outside the reflection zone.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-danger-zone.png\" alt=\"Danger zone, top view\" width=\"1600\" height=\"700\" class=\"wp-image-17184\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-danger-zone.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-danger-zone-600x263.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-danger-zone-1024x448.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-danger-zone-768x336.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-danger-zone-1536x672.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-danger-zone-18x8.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">PERSONAL PROTECTIVE EQUIPMENT<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">All PPE must match the output power and the wavelength range on the laser label of the machine. Persons in the immediate vicinity wear the same eye protection as the operator.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-ppe.png\" alt=\"PPE for the operator\" width=\"1600\" height=\"844\" class=\"wp-image-17185\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-ppe.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-ppe-600x317.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-ppe-1024x540.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-ppe-768x405.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-ppe-1536x810.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-ppe-18x9.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-saf-s14-1.png\" alt=\"\" width=\"120\" height=\"153\" class=\"wp-image-17186\" style=\"max-width:120px;height:auto\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-saf-s14-1.png 275w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-saf-s14-1-9x12.png 9w\" sizes=\"(max-width: 120px) 100vw, 120px\" \/><\/td>\n<td><strong>EYES AND FACE<\/strong><br>Laser welding helmet (recommended) or laser safety goggles<br>EN 207:2017, full wavelength range<\/td>\n<\/tr>\n<tr>\n<td><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-saf-s14-4.png\" alt=\"\" width=\"120\" height=\"120\" class=\"wp-image-17187\" style=\"max-width:120px;height:auto\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-saf-s14-4.png 980w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-saf-s14-4-600x600.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-saf-s14-4-150x150.png 150w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-saf-s14-4-768x768.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-saf-s14-4-12x12.png 12w\" sizes=\"(max-width: 120px) 100vw, 120px\" \/><\/td>\n<td><strong>UNDER THE HELMET<\/strong><br>Laser safety goggles as supplied: OD7+ D LB6 + IRM LB7 or OD8+ D LB6 + IRM LB8<\/td>\n<\/tr>\n<tr>\n<td><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-saf-s14-3.png\" alt=\"\" width=\"120\" height=\"92\" class=\"wp-image-17188\" style=\"max-width:120px;height:auto\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-saf-s14-3.png 314w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-saf-s14-3-16x12.png 16w\" sizes=\"(max-width: 120px) 100vw, 120px\" \/><\/td>\n<td><strong>HANDS<\/strong><br>Laser- and heat-resistant gloves<br>EN 388, EN 12477, protection at 1070 nm<\/td>\n<\/tr>\n<tr>\n<td><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-saf-s14-2.png\" alt=\"\" width=\"120\" height=\"120\" class=\"wp-image-17189\" style=\"max-width:120px;height:auto\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-saf-s14-2.png 378w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-saf-s14-2-150x150.png 150w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-saf-s14-2-12x12.png 12w\" sizes=\"(max-width: 120px) 100vw, 120px\" \/><\/td>\n<td><strong>BODY<\/strong><br>Welding jacket EN ISO 11611, long sleeves, collar closed<br>No synthetics, no reflective jewellery<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Item<\/th>\n<th>Requirement (MA1 operating manual, 2.6.1)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Laser safety goggles<\/strong><\/td>\n<td>Recommended up to 2,000 W CW and exposure &lt; 1 m: OD9+ (1070\u20131075 nm) D LB6 + IR LB8 + M LB9 \u00b7 OD8+ (1075\u20131080 nm) D LB6 + IRM LB8 \u00b7 OD7+ (1080\u20131087 nm) D LB6 + IRM LB7<\/td>\n<\/tr>\n<tr>\n<td><strong>Laser welding helmet<\/strong><\/td>\n<td>PPE Regulation (EU) 2016\/425; EN ISO 16321-1:2022, EN ISO 16321-2:2021, EN 207:2017. Material 900\u20131100 D LB5 \/ LB7 R LB8; viewing window 900\u20131080 D LB7 IR LB8. Keep 500 mm distance along the line of sight, maximum safety angle 45\u00b0<\/td>\n<\/tr>\n<tr>\n<td><strong>Gloves<\/strong><\/td>\n<td>EN 388:2016+A1, EN 12477:2001+A1:2005, suitable for use with EN ISO 11611 and EN ISO 11612 clothing<\/td>\n<\/tr>\n<tr>\n<td><strong>Clothing<\/strong><\/td>\n<td>EN ISO 11611:2015 and EN ISO 13688; close-fitting, long, skin fully covered; long hair in a hair net<\/td>\n<\/tr>\n<tr>\n<td><strong>Further PPE<\/strong><\/td>\n<td>Safety shoes, hearing protection; respiratory protection in small spaces or where required<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td><strong>CHECK THE EYEWEAR LABEL BEFORE EVERY USE: 1080 NM AND THE RIGHT PROTECTION LEVEL. DAMAGED EYEWEAR IS REPLACED.<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">LASER SAFETY OFFICER<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Before class 3R, 3B or 4 lasers are operated, the employer appoints a laser safety officer where national law requires it or where the employer lacks the technical expertise. The laser safety officer is qualified by a training course, keeps that qualification up to date and supports the employer with the risk assessment, the safety measures and the monitoring of safe operation.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m4.jpg\" alt=\"Set it up right\" width=\"1600\" height=\"462\" class=\"wp-image-17190\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m4.jpg 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m4-600x173.jpg 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m4-1024x296.jpg 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m4-768x222.jpg 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m4-1536x444.jpg 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m4-18x5.jpg 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>MODULE 04 \u00b7 SYSTEM AND SET-UP<\/strong><\/p>\n\n\n\n<h2 id=\"set-it-up-right\" class=\"wp-block-heading\">SET IT UP RIGHT<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>A SAFE WELD STARTS AT THE PLUG.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Components, connections, gas, wire, focus and activation.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">SYSTEM OVERVIEW<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\" style=\"max-width:360px\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-app-s18-1.png\" alt=\"MA1 system\" width=\"1571\" height=\"1204\" class=\"wp-image-17191\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-app-s18-1.png 1571w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-app-s18-1-600x460.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-app-s18-1-1024x785.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-app-s18-1-768x589.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-app-s18-1-1536x1177.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-app-s18-1-16x12.png 16w\" sizes=\"(max-width: 1571px) 100vw, 1571px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-front.png\" alt=\"MA1 front\" width=\"1600\" height=\"853\" class=\"wp-image-17192\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-front.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-front-600x320.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-front-1024x546.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-front-768x409.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-front-1536x819.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-front-18x10.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-rear.png\" alt=\"MA1 rear\" width=\"1600\" height=\"834\" class=\"wp-image-17194\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-rear.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-rear-600x313.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-rear-1024x534.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-rear-768x400.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-rear-1536x801.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-rear-18x9.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-torch.png\" alt=\"MA1 torch\" width=\"1600\" height=\"780\" class=\"wp-image-17195\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-torch.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-torch-600x293.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-torch-1024x499.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-torch-768x374.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-torch-1536x749.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-torch-18x9.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Component<\/th>\n<th>Key elements<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Laserschwei\u00dfger\u00e4t<\/strong><\/td>\n<td>7-inch touchscreen, status LED, emergency stop, safety key switch, safety loop interface, castors with brakes, cable reel<\/td>\n<\/tr>\n<tr>\n<td><strong>Rear panel<\/strong><\/td>\n<td>Main switch, power input 200\u2013240 V AC, EX-CTRL (door interlock, DB25), RS232 service interface, FEEDER connection, ground connection, shielding gas inlet<\/td>\n<\/tr>\n<tr>\n<td><strong>Hose pack and torch<\/strong><\/td>\n<td>Armored fiber cable, gas tube, torch with laser trigger, wire feed switch, indicator LED, protective window and focus lens slots, scale tube, nozzle<\/td>\n<\/tr>\n<tr>\n<td><strong>T1 wire feeder<\/strong><\/td>\n<td>On\/off switch, manual feed and withdrawal buttons, continuous or pulsed feed at 2\u2013100 mm\/s, wire 0.8 \/ 1.0 \/ 1.2 \/ 1.6 mm<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">UNPACK AND PLACE<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n\n<li>Inspect the packaging for transport damage; report damage to Maxphotonics.<\/li>\n\n\n<li>Lift the laser welder out with two persons. Never lift it by the hose pack or cable.<\/li>\n\n\n<li>Check the fiber cable for damage. Do not kink, crush or twist it.<\/li>\n\n\n<li>Place the machine on a level surface and lock the castor brakes.<\/li>\n\n\n<li>Keep the air intake underneath free and 1 m clear around the machine. Keep liquids and foreign objects away from the top.<\/li>\n\n\n<li>Route cables so that they form no loops and no tripping hazards.<\/li>\n\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">CONNECT<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Switch the main switch off before connecting. Connect in this order:<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\" style=\"max-width:430px\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-app-s23-1.png\" alt=\"Set-up view with connections a to g\" width=\"896\" height=\"511\" class=\"wp-image-17196\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-app-s23-1.png 896w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-app-s23-1-600x342.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-app-s23-1-768x438.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-app-s23-1-18x10.png 18w\" sizes=\"(max-width: 896px) 100vw, 896px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th><\/th>\n<th>Connection<\/th>\n<th>Hinweis<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>a<\/strong><\/td>\n<td>Power cable<\/td>\n<td>Single-phase 200\u2013240 V AC, grounded via protective earth; 16 A or 32 A depending on model<\/td>\n<\/tr>\n<tr>\n<td><strong>b<\/strong><\/td>\n<td>Loop cable<\/td>\n<td>Front of the laser welder; workpiece clamp on the workpiece or table. Never connect the clamp to the torch \u2013 irreparable damage.<\/td>\n<\/tr>\n<tr>\n<td><strong>c<\/strong><\/td>\n<td>EX-CTRL<\/td>\n<td>Door interlock switch; tighten both screws. Connection on site is the operator\u2019s responsibility<\/td>\n<\/tr>\n<tr>\n<td><strong>d<\/strong><\/td>\n<td>Shielding gas<\/td>\n<td>Gas hose (outside diameter 6 mm) to the push-in inlet on the rear<\/td>\n<\/tr>\n<tr>\n<td><strong>e<\/strong><\/td>\n<td>Ground cable<\/td>\n<td>Ground nut of the housing to plant ground \u2013 protects against static discharge<\/td>\n<\/tr>\n<tr>\n<td><strong>f<\/strong><\/td>\n<td>Wire feeder cable<\/td>\n<td>FEEDER on welder and wire feeder; red dot up<\/td>\n<\/tr>\n<tr>\n<td><strong>g<\/strong><\/td>\n<td>Torch liner<\/td>\n<td>From wire feeder to the wire feed module on the torch<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">SHIELDING GAS<\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td><strong>99.99 %<\/strong><\/td>\n<td>Gas purity, argon or nitrogen<\/td>\n<\/tr>\n<tr>\n<td><strong>0.8\u20131.5 bar<\/strong><\/td>\n<td>Inlet pressure<\/td>\n<\/tr>\n<tr>\n<td><strong>8\u201312 l\/min<\/strong><\/td>\n<td>Flow rate<\/td>\n<\/tr>\n<tr>\n<td><strong>\u2265 8 l\/min<\/strong><\/td>\n<td>Pressure regulator with flow meter<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-gas.png\" alt=\"Shielding gas supply\" width=\"1600\" height=\"412\" class=\"wp-image-17197\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-gas.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-gas-600x155.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-gas-1024x264.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-gas-768x198.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-gas-1536x396.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-gas-18x5.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The shielding gas also cools the torch optics. Check the flow with the <strong>Gas manual<\/strong> button in Expert Mode. Choose the gas to suit the material:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Gas<\/th>\n<th>Strengths<\/th>\n<th>Limits<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Argon (Ar)<\/strong><\/td>\n<td>Inert, prevents oxidation; few pores in carbon steel; suits reactive metals<\/td>\n<td>Narrower weld profile<\/td>\n<\/tr>\n<tr>\n<td><strong>Nitrogen (N2)<\/strong><\/td>\n<td>Low cost; very low pore formation in stainless steel; common for stainless steel and aluminium<\/td>\n<td>Can cause brittleness, especially in carbon steel<\/td>\n<\/tr>\n<tr>\n<td><strong>Ar\/H2 (95\/5 %)<\/strong><\/td>\n<td>Best penetration in stainless steel<\/td>\n<td>Higher cost<\/td>\n<\/tr>\n<tr>\n<td><strong>Ar\/O2 (2\u20134 %)<\/strong><\/td>\n<td>Best penetration in carbon steel<\/td>\n<td>Carbon steel only<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Source: THEO Application Workshop 2026, shielding gas case studies (wire feed, AISI 304 and S235).<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">PREPARE THE WIRE FEEDER<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n\n<li><strong>Spool:<\/strong> open the housing (mind your fingers), loosen the fastening nut, mount the spool so that the pin engages, tighten.<\/li>\n\n\n<li><strong>Rollers:<\/strong> U rollers for aluminium wire, V rollers for steel and stainless steel. The screws have a <strong>left-hand thread<\/strong>. Mount the rollers with type and diameter visible.<\/li>\n\n\n<li><strong>Thread the wire:<\/strong> levers down, guide the wire over both rollers into the liner connection until about 10 cm protrude, levers up.<\/li>\n\n\n<li><strong>Liner:<\/strong> lay it straight or in a wide radius. After rethreading, run the wire once completely through the liner.<\/li>\n\n<\/ul>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-wire.png\" alt=\"Wire path through the feeder\" width=\"1600\" height=\"540\" class=\"wp-image-17198\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-wire.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-wire-600x203.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-wire-1024x346.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-wire-768x259.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-wire-1536x518.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-wire-18x6.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td><strong>WARNING \u2013 EYE INJURY<\/strong><br>Never look into the liner connection, the liner outlet or the wire feeding nozzle while threading or moving the wire. Wear safety goggles.<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">PREPARE THE TORCH<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n\n<li>Slide the wire feed module onto the scale tube and align the wire nozzle parallel to the welding nozzle, <strong>2\u20135 mm apart<\/strong>.<\/li>\n\n\n<li>The pilot laser must hit the centre of the extended wire.<\/li>\n\n\n<li>Select the welding nozzle for the joint (fillet, lap, edge, inside or outside corner) and the wire nozzle for the wire diameter.<\/li>\n\n\n<li>Set the focal plane on the scale tube: loosen the nut, set the value, tighten by hand.<\/li>\n\n<\/ul>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-focus.png\" alt=\"Focal plane positions\" width=\"1600\" height=\"492\" class=\"wp-image-17199\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-focus.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-focus-600x185.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-focus-1024x315.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-focus-768x236.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-focus-1536x472.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-focus-18x6.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Scale<\/th>\n<th>Focus position<\/th>\n<th>Typical use<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>0 to \u221215<\/strong><\/td>\n<td>Below the workpiece surface<\/td>\n<td>Thicker sheet<\/td>\n<\/tr>\n<tr>\n<td><strong>0<\/strong><\/td>\n<td>On the workpiece surface<\/td>\n<td>Reference position<\/td>\n<\/tr>\n<tr>\n<td><strong>0 to +15<\/strong><\/td>\n<td>Above the workpiece surface<\/td>\n<td>Thinner sheet<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Rule of thumb from the Application Workshop: defocus negatively by about 2\/3 of the material thickness and add the wire diameter; adjust to the joint.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">ACTIVATE THE MACHINE<\/h3>\n\n\n\n<ol class=\"wp-block-list\">\n\n<li>Register the machine with the serial number from the delivery slip at the THEO Academy.<\/li>\n\n\n<li>Watch the training videos attentively, take notes, clarify open questions with your supervisor or THEO service.<\/li>\n\n\n<li>Complete the multiple-choice test and send it.<\/li>\n\n\n<li>Enter the authorization code received by e-mail under System Information &gt; Authorization code.<\/li>\n\n<\/ol>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m5.jpg\" alt=\"Weld safely\" width=\"1600\" height=\"462\" class=\"wp-image-17200\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m5.jpg 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m5-600x173.jpg 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m5-1024x296.jpg 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m5-768x222.jpg 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m5-1536x444.jpg 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m5-18x5.jpg 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>MODULE 05 \u00b7 SAFE OPERATION<\/strong><\/p>\n\n\n\n<h2 id=\"weld-safely\" class=\"wp-block-heading\">WELD SAFELY<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>CHECK. START. WELD. STOP. EVERY TIME.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Daily check, start-up, parameters, torch handling and shut-down.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">CHECK BEFORE EVERY SHIFT<\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>#<\/th>\n<th>Check<\/th>\n<th>OK<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>01<\/td>\n<td>Machine, torch and cables undamaged, nothing loose or missing; hose pack not kinked<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>02<\/td>\n<td>Protective window clean; red guide laser round and complete, without blind spots<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>03<\/td>\n<td>Welding nozzle and wire nozzle correct for the job and undamaged<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>04<\/td>\n<td>Loop cable intact, clamp on the workpiece<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>05<\/td>\n<td>Gas connected, cylinder upright and secured, flow 8\u201312 l\/min<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>06<\/td>\n<td>Fume extraction running and positioned at the welding zone<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>07<\/td>\n<td>Laser area closed: curtains or walls complete, door interlock connected, warning light working, signs in place<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>08<\/td>\n<td>No combustible or reflective objects in the area; fire extinguisher accessible<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>09<\/td>\n<td>Emergency stop accessible<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>10<\/td>\n<td>PPE complete and matching the laser label; everyone in the area protected<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h4 class=\"wp-block-heading\">RED GUIDE LASER CHECK<\/h4>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-guide.png\" alt=\"Red guide laser OK and not OK\" width=\"1600\" height=\"444\" class=\"wp-image-17201\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-guide.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-guide-600x167.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-guide-1024x284.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-guide-768x213.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-guide-1536x426.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-guide-18x5.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">START-UP SEQUENCE<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-startup.png\" alt=\"Start-up sequence in nine steps\" width=\"1600\" height=\"790\" class=\"wp-image-17202\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-startup.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-startup-600x296.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-startup-1024x506.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-startup-768x379.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-startup-1536x758.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-d-startup-18x9.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td><strong>WARNING<\/strong><br>The laser emits only when the nozzle touches the workpiece and the trigger is held. Never try to \u201ctest\u201d the beam in the air or on the hand.<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">SETTING PARAMETERS<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Only trained personnel make entries on the display. Wrong settings increase reflections and can damage the system.<\/p>\n\n\n\n<h4 class=\"wp-block-heading\">BASIC MODE<\/h4>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-screen-basic.png\" alt=\"Basic Mode screen\" width=\"1600\" height=\"732\" class=\"wp-image-17203\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-screen-basic.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-screen-basic-600x275.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-screen-basic-1024x468.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-screen-basic-768x351.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-screen-basic-1536x703.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-screen-basic-18x8.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Select material, thickness and joint type, choose whether to use the wire feeder, then enable the laser. Basic Mode uses verified factory presets and is the default after start-up. Fish scale pattern and, on the MA1-35, Mode D are available here.<\/p>\n\n\n\n<h4 class=\"wp-block-heading\">EXPERT MODE<\/h4>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-screen-expert.png\" alt=\"Expert Mode screen\" width=\"1600\" height=\"860\" class=\"wp-image-17204\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-screen-expert.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-screen-expert-600x323.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-screen-expert-1024x550.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-screen-expert-768x413.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-screen-expert-1536x826.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-screen-expert-18x10.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Parameter<\/th>\n<th>Range \/ guidance<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Laserleistung<\/strong><\/td>\n<td>0\u2013100 % of machine maximum<\/td>\n<\/tr>\n<tr>\n<td><strong>Wobble width<\/strong><\/td>\n<td>0\u20134 mm; 2\u20133 mm recommended<\/td>\n<\/tr>\n<tr>\n<td><strong>Wobble frequency<\/strong><\/td>\n<td>Up to 220 Hz at full wobble width; 40\u201380 Hz recommended for manual welding<\/td>\n<\/tr>\n<tr>\n<td><strong>Light mode<\/strong><\/td>\n<td>CW (continuous), Pulse, Shooting (tack welding)<\/td>\n<\/tr>\n<tr>\n<td><strong>Gas on \/ off delay<\/strong><\/td>\n<td>Pre-flow and post-flow time in ms<\/td>\n<\/tr>\n<tr>\n<td><strong>Ramp up \/ down<\/strong><\/td>\n<td>Power ramp in ms; ramp up at least 100 ms<\/td>\n<\/tr>\n<tr>\n<td><strong>Wire feed<\/strong><\/td>\n<td>Start low, about 10 mm\/s; the wider the wobble, the slower the wire<\/td>\n<\/tr>\n<tr>\n<td><strong>Parameter sets<\/strong><\/td>\n<td>Up to 32 custom sets under Process parameters &gt; Customize<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h4 class=\"wp-block-heading\">WOBBLE AND WIRE SPEED<\/h4>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-wobble.png\" alt=\"Wobble frequency correct and wrong\" width=\"1600\" height=\"492\" class=\"wp-image-17206\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-wobble.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-wobble-600x185.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-wobble-1024x315.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-wobble-768x236.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-wobble-1536x472.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-wobble-18x6.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<h4 class=\"wp-block-heading\">REFERENCE VALUES \u2013 FILLET WELD WITHOUT WIRE<\/h4>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Material<\/th>\n<th>St\u00e4rke<\/th>\n<th>Leistung<\/th>\n<th>Wobble width<\/th>\n<th>Frequency<\/th>\n<th>Focus<\/th>\n<th>Gas flow<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Carbon steel Q235B<\/strong><\/td>\n<td>1 \/ 1.5 \/ 2.5 mm<\/td>\n<td>500 \/ 650 \/ 800 W<\/td>\n<td>1\u20132 \/ 2 \/ 2.5 mm<\/td>\n<td>60\u201380 \/ 60\u201380 \/ 50\u201370 Hz<\/td>\n<td>\u22121 to 1 \/ \u22121 to 1 \/ \u22122 to 1<\/td>\n<td>8\u201310 l\/min<\/td>\n<\/tr>\n<tr>\n<td><strong>Stainless SUS 304<\/strong><\/td>\n<td>1 \/ 2 \/ 2.5 mm<\/td>\n<td>300 \/ 550 \/ 800 W<\/td>\n<td>1\u20132 \/ 2 \/ 2.5 mm<\/td>\n<td>40\u201370 Hz<\/td>\n<td>\u22121 to 1 \/ \u22121 to 1 \/ \u22122 to 1<\/td>\n<td>8\u201310 l\/min<\/td>\n<\/tr>\n<tr>\n<td><strong>Galvanized sheet<\/strong><\/td>\n<td>1 \/ 2 \/ 2.5 mm<\/td>\n<td>300 \/ 400 \/ 500 W<\/td>\n<td>1\u20132 \/ 2 \/ 2.5 mm<\/td>\n<td>60\u201380 \/ 60\u201380 \/ 50\u201370 Hz<\/td>\n<td>\u22121 to 1 \/ \u22121 to 1 \/ \u22122 to 1<\/td>\n<td>8\u201310 l\/min<\/td>\n<\/tr>\n<tr>\n<td><strong>Aluminium Al6061<\/strong><\/td>\n<td>1 \/ 2 mm<\/td>\n<td>600 \/ 800 W<\/td>\n<td>1\u20132 \/ 2 mm<\/td>\n<td>60\u201380 Hz<\/td>\n<td>\u22121 to 1<\/td>\n<td>8\u201310 l\/min<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Source: MA1 operating manual, 11.4.1. Dragging position, nitrogen 99.99 %, welding speed about 10\u201320 mm\/s. Reference values only \u2013 trial welds decide.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">HANDLING THE TORCH<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-angle.png\" alt=\"Torch angle do and don&#x27;t\" width=\"1600\" height=\"510\" class=\"wp-image-17207\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-angle.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-angle-600x191.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-angle-1024x326.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-angle-768x245.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-angle-1536x490.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-angle-18x6.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Do<\/th>\n<th>Don\u2019t<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Hold the torch head at <strong>30\u00b0\u201370\u00b0<\/strong> to the workpiece. Best: handle parallel to the workpiece, about 70\u00b0.<\/td>\n<td>Hold the torch perpendicular: the beam reflects back into the optics and damages them.<\/td>\n<\/tr>\n<tr>\n<td>Concentrate on guiding the torch. The wire carries the energy into the joint; there is little need to watch the melt pool.<\/td>\n<td>Hold the torch too flat: the beam reflects into the room and becomes uncontrolled.<\/td>\n<\/tr>\n<tr>\n<td>Keep the torch below eye level and your head out of the fumes.<\/td>\n<td>Weld highly reflective material without extra care for multiple reflections.<\/td>\n<\/tr>\n<tr>\n<td>Lift the torch to free the wire from the melt pool before releasing the trigger.<\/td>\n<td>Leave the machine unattended while it is ready to emit.<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td><strong>TORCH ANGLE IS A SAFETY SETTING: 30\u00b0\u201370\u00b0 PROTECTS PEOPLE AND OPTICS.<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">STOP AND SWITCH OFF<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-shutdown.png\" alt=\"Shut-down sequence\" width=\"1600\" height=\"216\" class=\"wp-image-17208\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-shutdown.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-shutdown-600x81.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-shutdown-1024x138.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-shutdown-768x104.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-shutdown-1536x207.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-shutdown-18x2.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m6.jpg\" alt=\"Keep it clean\" width=\"1600\" height=\"462\" class=\"wp-image-17209\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m6.jpg 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m6-600x173.jpg 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m6-1024x296.jpg 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m6-768x222.jpg 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m6-1536x444.jpg 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m6-18x5.jpg 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>MODULE 06 \u00b7 CARE AND WEAR PARTS<\/strong><\/p>\n\n\n\n<h2 id=\"keep-it-clean\" class=\"wp-block-heading\">KEEP IT CLEAN<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>THE BEST SERVICE IS THE ONE YOU DON\u2019T NEED.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Most optical damage starts with dirt. Here is how to keep it out.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">WHO DOES WHAT<\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Operator<\/th>\n<th>THEO service only<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Cleaning of laser welder, torch and wire feeder; protective window (safety glass); welding and wire nozzles; wire feed rollers, spool and liner; visual inspections<\/td>\n<td>Opening the housing; focus lens, collimator, galvo; fiber and hose pack; electrical repairs; all faults not listed for the user. Disassembly without approval voids the warranty.<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h4 class=\"wp-block-heading\">TORCH PARTS<\/h4>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-exploded.png\" alt=\"Exploded view of the torch\" width=\"1600\" height=\"571\" class=\"wp-image-17210\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-exploded.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-exploded-600x214.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-exploded-1024x365.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-exploded-768x274.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-exploded-1536x548.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-exploded-18x6.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">FOUR RULES FOR OPTICS<\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td><strong>Clean first. Open second.<\/strong><\/td>\n<td>Clean the outside of the torch before opening any slot. External dirt becomes internal contamination. Never open a contaminated torch.<\/td>\n<\/tr>\n<tr>\n<td><strong>Keep the opening sideways.<\/strong><\/td>\n<td>Never upward \u2013 dust falls in. Seal the focus tube with Kapton tape and close it immediately. Never leave optics exposed.<\/td>\n<\/tr>\n<tr>\n<td><strong>Contamination absorbs.<\/strong><\/td>\n<td>A dirty window absorbs laser energy and creates a hot spot: burned coating, burned window, optical failure. Visibly clean does not mean optically safe \u2013 particles from 0.1 \u00b5m matter.<\/td>\n<\/tr>\n<tr>\n<td><strong>One way only.<\/strong><\/td>\n<td>An optic that has been removed, contaminated or damaged is replaced, not cleaned and refitted.<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-clean.png\" alt=\"Clean-first rules\" width=\"1600\" height=\"499\" class=\"wp-image-17211\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-clean.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-clean-600x187.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-clean-1024x319.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-clean-768x240.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-clean-1536x479.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-clean-18x6.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-particles.png\" alt=\"Particle sizes\" width=\"1600\" height=\"364\" class=\"wp-image-17212\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-particles.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-particles-600x137.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-particles-1024x233.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-particles-768x175.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-particles-1536x349.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-particles-18x4.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">PREVENT BEFORE YOU REPAIR<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n\n<li>Check the red guide laser before every weld: a blind spot, an irregular shape or a missing spot means a contaminated or damaged window.<\/li>\n\n\n<li>Use the correct parameters and torch angle \u2013 they protect the optics and extend window life.<\/li>\n\n\n<li>After a longer break, briefly purge the gas line to clear loose particles from the nozzle.<\/li>\n\n\n<li>Keep grinding and dusty work away from the welding torch.<\/li>\n\n\n<li>Check the Service Bulletins regularly.<\/li>\n\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">CHANGE THE PROTECTIVE WINDOW<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-window-steps.png\" alt=\"Protective window change in seven steps\" width=\"1600\" height=\"348\" class=\"wp-image-17213\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-window-steps.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-window-steps-600x131.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-window-steps-1024x223.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-window-steps-768x167.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-window-steps-1536x334.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-window-steps-18x4.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<ol class=\"wp-block-list\">\n\n<li>Switch off the main switch and disconnect the power supply.<\/li>\n\n\n<li>Clean the outside of the torch with a dry towel.<\/li>\n\n\n<li>Loosen the knurled screw and pull out the window compartment \u2013 opening sideways.<\/li>\n\n\n<li>Mask the shaft of the compartment with tape to protect the optics.<\/li>\n\n\n<li>Remove the sealing ring and tilt out the old window.<\/li>\n\n\n<li>Hold the new window against the light and check it is clean. Never touch it with bare fingers.<\/li>\n\n\n<li>Insert the new window and the sealing ring, remove the tape, insert the compartment and tighten the knurled screw.<\/li>\n\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">Soot during welding or loss of power usually point to a contaminated window. If it fails again after a short time, contact THEO service.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">INTERVALS<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-intervals.png\" alt=\"Maintenance intervals\" width=\"1600\" height=\"187\" class=\"wp-image-17214\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-intervals.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-intervals-600x70.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-intervals-1024x120.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-intervals-768x90.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-intervals-1536x180.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-intervals-18x2.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>When<\/th>\n<th>Task<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Before every weld<\/strong><\/td>\n<td>Check the red guide laser<\/td>\n<\/tr>\n<tr>\n<td><strong>Before every shift<\/strong><\/td>\n<td>Visual inspection: fans run smoothly, gas hoses tight, wire feed module and insulation firm, loop cable intact; nozzle and protective window checked; wire feeder cable, buttons, brakes, liner, rollers<\/td>\n<\/tr>\n<tr>\n<td><strong>Weekly (recommended)<\/strong><\/td>\n<td>Blow out the laser welder from the top with compressed air, maximum 2 bar, machine disconnected<\/td>\n<\/tr>\n<tr>\n<td><strong>Monthly<\/strong><\/td>\n<td>Clean the wire feeder with a dry cloth and vacuum it; check rollers and pressure rollers for wear<\/td>\n<\/tr>\n<tr>\n<td><strong>At least every 2 months<\/strong><\/td>\n<td>Clean ventilation channels and grille<\/td>\n<\/tr>\n<tr>\n<td><strong>At least every 3 months<\/strong><\/td>\n<td>Remove the grille underneath (6 screws), vacuum and blow out the ventilation openings<\/td>\n<\/tr>\n<tr>\n<td><strong>As required<\/strong><\/td>\n<td>Liner: blow out minor blockages, replace if heavily blocked. Torch: dry towel only, never compressed air<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Regular inspection by THEO service is recommended for safe operation.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m7.jpg\" alt=\"Act fast, act right\" width=\"1600\" height=\"462\" class=\"wp-image-17215\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m7.jpg 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m7-600x173.jpg 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m7-1024x296.jpg 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m7-768x222.jpg 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m7-1536x444.jpg 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m7-18x5.jpg 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>MODULE 07 \u00b7 FAULTS AND EMERGENCIES<\/strong><\/p>\n\n\n\n<h2 id=\"act-fast-act-right\" class=\"wp-block-heading\">ACT FAST, ACT RIGHT<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>KNOW THE SEQUENCE BEFORE YOU NEED IT.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Emergencies, alarms, fault finding and where to get help.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">EMERGENCIES<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-emergency.png\" alt=\"Emergency procedures\" width=\"1600\" height=\"748\" class=\"wp-image-17216\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-emergency.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-emergency-600x281.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-emergency-1024x479.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-emergency-768x359.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-emergency-1536x718.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-emergency-18x8.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">FAULTS YOU CAN FIX<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Most stops are a safety function doing its job. Work through the chain before you call service.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-faulttree.png\" alt=\"Fault diagnosis: laser does not emit\" width=\"1600\" height=\"764\" class=\"wp-image-17217\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-faulttree.png 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-faulttree-600x287.png 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-faulttree-1024x489.png 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-faulttree-768x367.png 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-faulttree-1536x733.png 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-f-faulttree-18x9.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Symptom \/ message<\/th>\n<th>Cause<\/th>\n<th>Action<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Laser does not emit<\/strong><\/td>\n<td>Safety key not in position 1<\/td>\n<td>Insert the key, turn to position 1<\/td>\n<\/tr>\n<tr>\n<td><strong>Laser not enabled \/ pilot laser off on contact<\/strong><\/td>\n<td>Loop cable not connected or clamp without contact<\/td>\n<td>Check loop cable, connection and clamp on the workpiece<\/td>\n<\/tr>\n<tr>\n<td><strong>Loss of power, soot<\/strong><\/td>\n<td>Protective window contaminated<\/td>\n<td>Change the protective window (Module 6)<\/td>\n<\/tr>\n<tr>\n<td><strong>E-Stop<\/strong><\/td>\n<td>Emergency stop pressed<\/td>\n<td>Remove the cause, turn the button to release<\/td>\n<\/tr>\n<tr>\n<td><strong>Interlock alarm<\/strong><\/td>\n<td>Door open or interlock circuit not closed<\/td>\n<td>Close the door, check the EX-CTRL connection<\/td>\n<\/tr>\n<tr>\n<td><strong>Gas<\/strong><\/td>\n<td>Shielding gas pressure too low<\/td>\n<td>Open the cylinder, check pressure and hoses<\/td>\n<\/tr>\n<tr>\n<td><strong>P-Lens Temp<\/strong><\/td>\n<td>Protective window too hot<\/td>\n<td>Change the window; increase gas flow if necessary; call service if it recurs<\/td>\n<\/tr>\n<tr>\n<td><strong>Ground fault \/ Ground Connect Detection<\/strong><\/td>\n<td>Protective earth not correctly connected<\/td>\n<td>Check connections; contact service<\/td>\n<\/tr>\n<tr>\n<td><strong>Torch Communicate<\/strong><\/td>\n<td>No communication between laser and torch<\/td>\n<td>Check cables; contact service<\/td>\n<\/tr>\n<tr>\n<td><strong>Software expiring \/ code invalid<\/strong><\/td>\n<td>Licence period reached or wrong code<\/td>\n<td>Re-enter the code; contact service for a new code<\/td>\n<\/tr>\n<tr>\n<td><strong>Overheating alarm<\/strong><\/td>\n<td>Laser temperature too high; emission stops<\/td>\n<td>Switch off, improve ventilation, contact service<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td><strong>ANY OTHER MESSAGE IS FOR THEO SERVICE. NEVER OPEN THE MACHINE.<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">GETTING HELP<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Open a service ticket with the <strong>serial number<\/strong> and a short description of the issue. For software updates, THEO service connects remotely via the RS232 interface.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td><strong>THEO Europe<\/strong><\/td>\n<td>c\/o Maxphotonics GmbH \u00b7 Dornierstra\u00dfe 11 \u00b7 82205 Gilching \u00b7 Germany<\/td>\n<\/tr>\n<tr>\n<td><strong>Telefon<\/strong><\/td>\n<td>+49 (0) 8105 730 38 90<\/td>\n<\/tr>\n<tr>\n<td><strong>E-mail<\/strong><\/td>\n<td>hello@theo.inc<\/td>\n<\/tr>\n<tr>\n<td><strong>Training<\/strong><\/td>\n<td>THEO Academy \u00b7 academy.theo.inc<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">TRANSPORT, STORAGE, DISPOSAL<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Transport and store the machine protected against impact and humidity, ideally in the original packaging, within the permitted ambient conditions (storage \u221210 to 60 \u00b0C) and out of reach of unauthorized persons. Dispose of the machine and its components according to national regulations.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m8.jpg\" alt=\"Prove it\" width=\"1600\" height=\"462\" class=\"wp-image-17218\" srcset=\"https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m8.jpg 1600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m8-600x173.jpg 600w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m8-1024x296.jpg 1024w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m8-768x222.jpg 768w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m8-1536x444.jpg 1536w, https:\/\/go.theo.inc\/wp-content\/uploads\/2026\/11\/theo-ma1-operator-handbook-s-m8-18x5.jpg 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>MODULE 08 \u00b7 COMPETENCE CHECK<\/strong><\/p>\n\n\n\n<h2 id=\"prove-it\" class=\"wp-block-heading\">PROVE IT<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>KNOWLEDGE CHECK. PRACTICAL TEST. SIGNATURE.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Ten questions, nine practical tasks, one record.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">KNOWLEDGE CHECK<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The trainer discusses every wrong answer before the practical assessment.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>#<\/th>\n<th>Question<\/th>\n<th>Expected answer (trainer)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>01<\/td>\n<td>Why is the MA1 beam especially dangerous for the eyes?<\/td>\n<td>1080 nm is invisible, triggers no blink reflex and is focused on the retina.<\/td>\n<\/tr>\n<tr>\n<td>02<\/td>\n<td>What does the NOHD tell you \u2013 and how large is it for your model?<\/td>\n<td>The distance within which the direct beam can damage the eye: 118\u2013282 m depending on model.<\/td>\n<\/tr>\n<tr>\n<td>03<\/td>\n<td>Where do other persons stand during welding?<\/td>\n<td>Behind the torch, outside the reflection zone \u2013 or outside the laser area.<\/td>\n<\/tr>\n<tr>\n<td>04<\/td>\n<td>What must happen before the laser can emit?<\/td>\n<td>Key in position 1, door closed, laser enabled, nozzle in contact with the workpiece, trigger pressed.<\/td>\n<\/tr>\n<tr>\n<td>05<\/td>\n<td>Name three safety functions of the MA1.<\/td>\n<td>Any three: key switch, authorization code, workpiece contact, emergency stop, interlock, fiber break detection, monitoring.<\/td>\n<\/tr>\n<tr>\n<td>06<\/td>\n<td>Which torch angle is correct, and why?<\/td>\n<td>30\u00b0\u201370\u00b0, best about 70\u00b0: no back-reflection into the optics, fewer reflections into the room.<\/td>\n<\/tr>\n<tr>\n<td>07<\/td>\n<td>What does an irregular red guide laser indicate?<\/td>\n<td>A contaminated or damaged protective window \u2013 change it before welding.<\/td>\n<\/tr>\n<tr>\n<td>08<\/td>\n<td>Where must the workpiece clamp never be connected?<\/td>\n<td>To the torch \u2013 irreparable damage.<\/td>\n<\/tr>\n<tr>\n<td>09<\/td>\n<td>Which eye protection is required?<\/td>\n<td>EN 207 goggles or helmet covering 1080 nm with the protection level on the laser label.<\/td>\n<\/tr>\n<tr>\n<td>10<\/td>\n<td>What do you do after an accident?<\/td>\n<td>Emergency stop, company accident procedures, physician immediately.<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">PRACTICAL ASSESSMENT<\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>#<\/th>\n<th>Task \u2013 the participant \u2026<\/th>\n<th>Passed<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>01<\/td>\n<td>checks the laser area and the machine with the pre-shift checklist<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>02<\/td>\n<td>puts on and checks the PPE correctly<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>03<\/td>\n<td>connects loop cable, gas and ground correctly and sets the gas flow<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>04<\/td>\n<td>follows the start-up sequence without help<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>05<\/td>\n<td>selects suitable parameters for a given job<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>06<\/td>\n<td>welds with the correct torch angle and keeps others out of the danger zone<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>07<\/td>\n<td>stops and shuts down correctly and removes the key<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>08<\/td>\n<td>changes the protective window following the clean-first rule<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>09<\/td>\n<td>reacts correctly to an emergency stop and an interlock alarm<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>REFERENCE<\/strong><\/p>\n\n\n\n<h2 id=\"words-that-matter\" class=\"wp-block-heading\">WORDS THAT MATTER<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>SHORT TERMS. CLEAR MEANING.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The terms used in this handbook and on the MA1.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Term<\/th>\n<th>Meaning<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Authorization code<\/strong><\/td>\n<td>Code sent by e-mail after the THEO Academy test. Unlocks the MA1 or extends its machine hours.<\/td>\n<\/tr>\n<tr>\n<td><strong>Basic Mode \/ Expert Mode<\/strong><\/td>\n<td>Basic Mode: verified presets by material, thickness and joint. Expert Mode: every parameter set by hand.<\/td>\n<\/tr>\n<tr>\n<td><strong>Class 4 laser<\/strong><\/td>\n<td>Highest laser class per EN 60825-1. Direct and diffuse radiation can damage eyes and skin and ignite materials.<\/td>\n<\/tr>\n<tr>\n<td><strong>Danger zone<\/strong><\/td>\n<td>The whole area in front of the torch during welding. Only the operator works there.<\/td>\n<\/tr>\n<tr>\n<td><strong>EX-CTRL<\/strong><\/td>\n<td>Interface on the rear panel for the two-channel door interlock and external control signals.<\/td>\n<\/tr>\n<tr>\n<td><strong>Interlock<\/strong><\/td>\n<td>Safety circuit that switches the laser off when the door of the laser area opens.<\/td>\n<\/tr>\n<tr>\n<td><strong>Laser controlled area<\/strong><\/td>\n<td>Enclosed area with interlocked access, warning lights and signs, where the MA1 may be operated.<\/td>\n<\/tr>\n<tr>\n<td><strong>LB \/ OD<\/strong><\/td>\n<td>Protection level of laser eyewear (EN 207) \/ optical density. The higher the value, the stronger the protection at the stated wavelength.<\/td>\n<\/tr>\n<tr>\n<td><strong>Loop cable<\/strong><\/td>\n<td>Cable from the laser welder to the workpiece clamp. The laser only emits when the nozzle touches the workpiece.<\/td>\n<\/tr>\n<tr>\n<td><strong>LSO<\/strong><\/td>\n<td>Laser safety officer. Supports the employer with risk assessment, safety measures and monitoring of safe operation.<\/td>\n<\/tr>\n<tr>\n<td><strong>NOHD<\/strong><\/td>\n<td>Nominal ocular hazard distance: the distance within which the direct beam can damage the eye (MA1: 118\u2013282 m).<\/td>\n<\/tr>\n<tr>\n<td><strong>NHZ<\/strong><\/td>\n<td>Nominal hazard zone as stated in the MA1 operating manual (MA1: 22\u201353 m).<\/td>\n<\/tr>\n<tr>\n<td><strong>PPE<\/strong><\/td>\n<td>Personal protective equipment: laser helmet or goggles, gloves, welding jacket, safety shoes, hearing protection.<\/td>\n<\/tr>\n<tr>\n<td><strong>Protective window<\/strong><\/td>\n<td>Coated safety glass at the torch exit. Protects the focus lens; a wear part changed by the operator.<\/td>\n<\/tr>\n<tr>\n<td><strong>Red guide laser<\/strong><\/td>\n<td>Visible pilot beam showing the welding spot. Its shape shows whether the protective window is clean.<\/td>\n<\/tr>\n<tr>\n<td><strong>Wobble<\/strong><\/td>\n<td>Oscillation of the beam across the seam, set by width (mm) and frequency (Hz).<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>RECORD<\/strong><\/p>\n\n\n\n<h2 id=\"training-record\" class=\"wp-block-heading\">TRAINING RECORD<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>SIGNED. FILED. REFRESHED EVERY YEAR.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Keep this record with the employer\u2019s safety documentation. Repeat the instruction at least annually and after any change.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td><strong>Participant (name)<\/strong><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td><strong>Company \/ site<\/strong><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td><strong>Machine model and serial number<\/strong><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td><strong>THEO Academy certificate (date)<\/strong><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td><strong>Authorization code entered (date)<\/strong><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td><strong>Trainer (name, organisation)<\/strong><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td><strong>Date and location of practical training<\/strong><\/td>\n<td><\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Module<\/th>\n<th>Completed<\/th>\n<th>Module<\/th>\n<th>Completed<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>1  Laser basics<\/td>\n<td>\u2610<\/td>\n<td>5  Safe operation<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>2  Hazards and residual risks<\/td>\n<td>\u2610<\/td>\n<td>6  Care and wear parts<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>3  Protective measures<\/td>\n<td>\u2610<\/td>\n<td>7  Faults and emergencies<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<tr>\n<td>4  System and set-up<\/td>\n<td>\u2610<\/td>\n<td>8  Competence check passed<\/td>\n<td>\u2610<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">By signing, the participant confirms having received and understood the instruction and the operating manual. The trainer confirms the competence check. The employer confirms authorization to operate the MA1.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td>&nbsp;<br>&nbsp;<\/td>\n<td>&nbsp;<br>&nbsp;<\/td>\n<td>&nbsp;<br>&nbsp;<\/td>\n<\/tr>\n<tr>\n<td>Date, signature participant<\/td>\n<td>Date, signature trainer<\/td>\n<td>Date, signature employer \/ LSO<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<tbody>\n<tr>\n<td><strong>Next refresher due<\/strong><\/td>\n<td><\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<p class=\"wp-block-paragraph\">Related documents: <a href=\"https:\/\/go.theo.inc\/de\/manuals\/ma1-operator-manual\/\">THEO MA1 Bedienungsanleitung<\/a> \u00b7 <a href=\"https:\/\/go.theo.inc\/de\/manuals\/theo-ma1-series-operating-parameters\/\">THEO MA1 Series | Betriebsparameter<\/a> \u00b7 <a href=\"https:\/\/go.theo.inc\/de\/manuals\/ma1-get-ready-for-delivery\/\">Get Ready for Delivery<\/a><\/p>","protected":false},"excerpt":{"rendered":"<p>THEO ACADEMY \u00b7 MA1 SERIESOPERATOR TRAINING HANDBOOKSAFE OPERATION OF THEO MA1 HAND-HELD LASER WELDERSTraining content according to Regulation (EU) 2023\/1230 and ISO 11553-2:2026MA1-35 \u00b7 MA1-45 \u00b7 MA1-65 \u00b7 MA1 ULTRAEdition 1.0 \u00b7 13 November 2026by MAXPHOTONICS INTRODUCTION ABOUT THIS HANDBOOK ONE PATH. EVERY OPERATOR. PROOF ON PAPER. What to know, what to do, and how [&hellip;]<\/p>\n","protected":false},"author":651,"featured_media":0,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false,"content-type":"","footnotes":""},"doc_category":[75],"doc_tag":[227,226],"class_list":["post-17169","docs","type-docs","status-publish","hentry","doc_category-user-manual","doc_tag-laser-welding","doc_tag-ma1-series"],"acf":[],"year_month":"2026-11","word_count":5289,"total_views":"9","reactions":{"happy":"0","normal":"0","sad":"0"},"author_info":{"name":"Anthony Tabor","author_nicename":"anthony-tabor","author_url":"https:\/\/go.theo.inc\/de\/blog\/author\/9d9c305310357cc9ce3256d88c34248b\/"},"doc_category_info":[{"term_name":"User Manual","term_url":"https:\/\/go.theo.inc\/de\/manuals-category\/user-manual\/"}],"doc_tag_info":[{"term_name":"Laser Welding","term_url":"https:\/\/go.theo.inc\/de\/manuals-tag\/laser-welding\/"},{"term_name":"MA1 Series","term_url":"https:\/\/go.theo.inc\/de\/manuals-tag\/ma1-series\/"}],"_links":{"self":[{"href":"https:\/\/go.theo.inc\/de\/wp-json\/wp\/v2\/docs\/17169","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/go.theo.inc\/de\/wp-json\/wp\/v2\/docs"}],"about":[{"href":"https:\/\/go.theo.inc\/de\/wp-json\/wp\/v2\/types\/docs"}],"author":[{"embeddable":true,"href":"https:\/\/go.theo.inc\/de\/wp-json\/wp\/v2\/users\/651"}],"replies":[{"embeddable":true,"href":"https:\/\/go.theo.inc\/de\/wp-json\/wp\/v2\/comments?post=17169"}],"version-history":[{"count":1,"href":"https:\/\/go.theo.inc\/de\/wp-json\/wp\/v2\/docs\/17169\/revisions"}],"predecessor-version":[{"id":17219,"href":"https:\/\/go.theo.inc\/de\/wp-json\/wp\/v2\/docs\/17169\/revisions\/17219"}],"wp:attachment":[{"href":"https:\/\/go.theo.inc\/de\/wp-json\/wp\/v2\/media?parent=17169"}],"wp:term":[{"taxonomy":"doc_category","embeddable":true,"href":"https:\/\/go.theo.inc\/de\/wp-json\/wp\/v2\/doc_category?post=17169"},{"taxonomy":"doc_tag","embeddable":true,"href":"https:\/\/go.theo.inc\/de\/wp-json\/wp\/v2\/doc_tag?post=17169"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}